Audi Q7 3.0 CASA EDC17CP04

[AKAINTERN]

Audi Q7 3.0 CASA EDC17CP04

4L1910401D 1037518178


Problem after programming the engine control unit.
I read galletto v54 on OBD, write a modified firmware on OBD.
The writing ended with an error "ERROR: ECU REJECT PROGRAMMING".
Writing the original firmware on OBD is the same error "ERROR: ECU REJECT PROGRAMMING".


Removed the ecu and read flash and eeprom in BOOT mode Galletto.

Write firmware galletto and kess on BOOT mode.

The car will not start.


Help restore the car.

[teerak2uk]

Audi Q7 3.0 CASA EDC17CP04

4L1910401D 1037518178


Problem after programming the engine control unit.
I read galletto v54 on OBD, write a modified firmware on OBD.
The writing ended with an error "ERROR: ECU REJECT PROGRAMMING".
Writing the original firmware on OBD is the same error "ERROR: ECU REJECT PROGRAMMING".


Removed the ecu and read flash and eeprom in BOOT mode Galletto.

Write firmware galletto and kess on BOOT mode.

The car will not start.


Help restore the car.Post your boot reads also for someone to help you

[electrones]

Hi m8

If u need i have flash and virgin eeprom 1037518084//1037503466 in boot mode fgtech and ktag

Cheers

[AKAINTERN]

Post your boot reads also for someone to help you
I can write the firmware in boot mode myself, but the car won't start.

[Summa]

Have you try to flash back with ODIS ?

[AKAINTERN]

Hi m8

If u need i have flash and virgin eeprom 1037518084//1037503466 in boot mode fgtech and ktag

Cheers

Do you think that during the firmware I have deteriorated with the eprom?
Share these eprom, I will try to write them boot mode.

[AKAINTERN]

Have you try to flash back with ODIS ?
can this be restored using odis ?
Odis, vcds and vagcanpro can take on the use, what else is needed for this?

[teerak2uk]

Write an original via boot and immo off might be an option

[Summa]

Try with ODIS or VAG CAN Pro to flash the unit first, you will need the related SGO file , as i have been attached.

[AKAINTERN]

Try with ODIS or VAG CAN Pro to flash the unit first, you will need the related SGO file , as i have been attached.

VAG CAN Pro can not write firmware. Button "flash .sgo" is not active.

[AKAINTERN]

Write an original via boot and immo off might be an option
How to make immo off in the firmware?

[teerak2uk]

In immo section mate

[AKAINTERN]

Write KESS firmware AXXX_178.ori.bin BOOT mode.

Now the error in the control unit P0607.
If you erase the error - the engine starts.

How to remove this error permanently?
How to make immo off firmware?

[electrones]

Hi friend
Take a look here
http://www.digital-kaos.co.uk/forums/showthread.php/688802-Audi-Q7-EDC17CP04-immooff

Cheers

[bersch8688]

Use ODIS to write ECU and ECU come back ;-)

[AKAINTERN]

Write ODIS firmware.
Read boot firmware from ECU, remove DPF and write modified firmware boot mode to ECU.
Engine start, no error !
All thanks!

[AKAINTERN]

Why couldn't vag can pro write sgo firmware?

[Summa]

It is Original tool ?

[AKAINTERN]

vag can pro clone

[Summa]

Then, don't expect more.

You should ask such questions if the tool was original, other way , the tool it is, as it is, live with that.

I am glad that you have fix the car in to the proper manner, and haven't slipped in to the immo off game.

[teerak2uk]

Write ODIS firmware.
Read boot firmware from ECU, remove DPF and write modified firmware boot mode to ECU.
Engine start, no error !
All thanks!What interface did you use with Odis to write

[AKAINTERN]

What interface did you use with Odis to write
VAS5054 OBD USB