Audi Q7 Q7 J518 ESL ELV flash dump needed

[tusentack]

Hi is there anyone that has a Audi Q7 J518 ESL ELV 1L59W flash dump that they can send to me? I think mine is corruped. I have found 1 on the forum that is for an A6 but I dont know if they are the same for both Q7 and A6?
My Eeeprome looks good. If I understand right all the important information about the car is in the eeprom?


Best Regards

[drugowaz]

What part hw and sw numbers of elv?

[tusentack]

It says on the box
HW-Nr/Stand
4F0905852B
3.1
SW-Nr/Index
4F0910852
02.20

[drugowaz]

If you wait till tomoriw i will send you correct flash

[rob h]

http://www.digital-kaos.co.uk/forums/showthread.php/663591-ELV-from-Audi-A6-ELV-4F0905852B
Mask:3L40K
Mask:1L59W
Do check what mask yours it is!


The replacement elv, write it with data it came with.
Then make a new 8E - Audi ID8E transponder.
Hook it to the car, and check if igniton comes on.

If mask is correct type, you can now write files by obd to ezs.

[tusentack]

OK no problem I can wait. Thanks

[tusentack]

Hi the mask on the CPU is 1L59W so the flash dump on the link is the wrong version.

Thanks

[EMCE159]

Man just cut this wire or repair your EZS. I think that you don't understand what you're doing. If your flash was damaged ezs would be dead completly. Btw. Don't write in 3 topics about one problem.

[tusentack]

Sorry for that. It will not happen again. That was not my intention at all. I will only write in this thread in the future.
Im just trying to fix my car in the best way. If I cut the wire will it show up the next time I have the car on service and the do diagnostics? And if I sell the car on later there would mayby be questions why the cable have been cut. What is the best way forward for me if I should try and repair my EZS?

[EMCE159]

All described, just search. But personally I think that, to do it good you have two options. Order brand new ezs and code it to car or cut wire to disable lock.