PDA

View Full Version : 535D DPF Removal (EDC16)



Andy61088
7th November, 2018, 07:17 PM
Hi All

Just after a little info, to remove my DPF and EGR would I need to do a full BDM flash or can it be done in the car? If it can be done in the car what is the best software to use?

Is the idea behind the BDM flash to modify checksums similar to the full 512 flash for the ms43 ecu in E39's etc?

Much appreciated.

gad3n
7th November, 2018, 09:36 PM
no bmd needed ... obd read is enough ... best software is winols .... the idea behind bdm is totally different :)

Andy61088
8th November, 2018, 11:35 AM
Ah ok cheers, I thought WinOls was a binary editor that didn't have flash capability?

fastmike
9th November, 2018, 02:24 AM
Do you speak software to edit file or read ecu?

Andy61088
9th November, 2018, 11:05 AM
Read/write the Ecu I meant

fastmike
9th November, 2018, 07:03 PM
WHAT YOU NEED OF A KESS V2, CMD, MAGPROG FOR EXAMPLE

Andy61088
24th November, 2018, 11:09 AM
I bought Kess and read the ECU partially and fully, apparently (both files 2048kB). Could anyone remove the DPF and EGR? Do I need to modify any checksums etc befor flashing back onto the car?

much appreciated

figani
24th November, 2018, 12:05 PM
Your kess will calculate the checksum and correct it before it starts to write...













When I helped you press Thanks and Reputation...

naprawa5
24th November, 2018, 12:25 PM
Your file dpf egr off.

Andy61088
24th November, 2018, 12:57 PM
Thank you very much!