PDA

View Full Version : A3 MPPS File EGR off



KesKinG
9th November, 2018, 07:32 PM
Hello guys

Need MPPS remap file for an A3 8PA 2.0 Tdi BKD engine. (2004)
EDC16U1

Im traveling a lot a year for work and need an economic file with more Torque and HP.
Also need EGR off

Important not more than 400NM torque for the gear.

Have someone a good Remap File for it

stage 1 with egr off

175HP 400NM torque




Thank you very much from Germany

drws3
9th November, 2018, 11:12 PM
Hello guys

Need MPPS remap file for an A3 8PA 2.0 Tdi BKD engine. (2004)
EDC16U1

Im traveling a lot a year for work and need an economic file with more Torque and HP.
Also need EGR off

Important not more than 400NM torque for the gear.

Have someone a good Remap File for it

stage 1 with egr off

175HP 400NM torque




Thank you very much from Germany

post original file here i give you a hand

KesKinG
10th November, 2018, 11:51 AM
Is this file also compatible to load it with MPPS software and hardware ?

KesKinG
10th November, 2018, 04:35 PM
can anybody help ?

or is something missing ?

dtip
10th November, 2018, 04:42 PM
can anybody help ?

or is something missing ?

yes you are missing basics, you don't need file that is "compatible with flashing tool" , MPPS in your case. Yes mpps can read/write that edc16 ecu as almost every other tool on market. You should read file from your ecu first and send that file to your tuner or post here.

KesKinG
10th November, 2018, 05:32 PM
And the file whats i posted ist not compatible?

drws3
10th November, 2018, 06:57 PM
And the file whats i posted ist not compatible?
he wants to say mpps is just a programmer the file you obtain after reading your car's ecu is the binary file that car uses to control the injectors turbo duration and so on and the file you obtain you have to modify it to get that extra hp nd torque nd to do egr off :D now i download your file lemme see if i can help you egr off yes i will do it but if you will remove it (the EGR i mean ) one day from care can you please tell me the Pcode or the DTC that leaves behind you might need a vcds to read the erorrs so i know what code i should delete from your file .

KesKinG
15th November, 2018, 05:58 PM
Hey guys today i read out my Ecu and saved the file.

my Hardware and Software data are this:


Vehicle Vin number: Wauzzz8P34A125xxxx
Bosch Hardware number: 0281011364
VW Software Number: 03G906016G
System type Number: R4 2,0L EDC G0105G


Can someone remap my file pls with my description what i wrote first.

thank you very much!

sandorvink1987
15th November, 2018, 06:10 PM
when im home i will make you a file ;)

FlashTune
15th November, 2018, 06:51 PM
Is this file also compatible to load it with MPPS software and hardware ?

here you have Stage 1 + EGR OFF

regards

KesKinG
15th November, 2018, 07:56 PM
hey i tested the file and i feel the more hp and the torque.

but also i saw on the consumption that it went really high under low rpm.

did you higher the diesel consumption also on neutral gas position?

i would love it to have a map which you can feel the more hp when i drive over 2600 rpm or 2800rpm.

i dont know if it is remappable to just lower a little more the consumption :)

but i appreciate that u took time for me :D

beltronics
17th November, 2018, 11:56 AM
Here you go

eljablo
13th June, 2019, 09:12 AM
Hi there. I need to tweak my A3 and I found this post can I ask you for pass so I can try it please.
Thanks

Ahmedtair94
21st August, 2021, 09:22 AM
Thank you germany

Ahmedtair94
21st August, 2021, 10:39 AM
Thank You bien

Ahmedtair94
21st August, 2021, 10:44 AM
Pass please