PDA

View Full Version : Checksum help



dannyanto9292
11th November, 2018, 01:35 AM
Greetings it is my first time using winols, I have edited the egr hysteresis map and removed the dtc and would like to confirm I haven't made any mistakes and my checksum is correct, everything is ok according to winols but as its my first time using I would rather someone with a bit more experience checked over the files for me, I have included both the original and modded files, thanks in advance.

vw golf mk5 1.9 pd bkc
03G 906 016 CB
028 101 190 0
EDC16u1

ivanmihov
11th November, 2018, 12:26 PM
your checksum is corrected OK,what tool did you use to read this ecu, it's better to let your tool do the checksum

dannyanto9292
11th November, 2018, 12:33 PM
I used mpps v13 to read the file from my ecu i am planning on flashing the modified file with the same tool

ivanmihov
11th November, 2018, 01:02 PM
you should not have any problems,just put you car on charger

dannyanto9292
11th November, 2018, 01:12 PM
Thanks for the reassurance, i dont have a battery charger but am intending on hooking my second car up with jump leads to keep battery voltage up, will this be acceptable?

ivanmihov
11th November, 2018, 01:28 PM
yes it's ok