PDA

View Full Version : kess new sd



mitsakos5800
14th November, 2018, 05:37 PM
hi friends have kess 5.017 clone with ksuite 2.47,I have lost the card and I want to cook a new one. can somebody help me? I tried multiple files but did not work. how can i learn what cid my Kess needs?

alexcdma
14th November, 2018, 05:43 PM
You need the SD image to match the SD CID. Write the CID of any SD you have, I will try to help.

mitsakos5800
14th November, 2018, 06:00 PM
You need the SD image to match the SD CID. Write the CID of any SD you have, I will try to help.

thank you very much.check pm

bergbahn
18th November, 2018, 05:28 PM
@mitsakos5800
works my created SD card correctly ?

Mario6
29th November, 2018, 04:52 PM
Hi. I have a problem with Kess v2 5.017 SW 2.23 (green PCB). I can not run the software. Earlier I had such a problem but after moving the SD card everything worked. Now I can not run the software. A message appears. You know how to solve this problem ?

gitko
29th November, 2018, 07:53 PM
Hi. I have a problem with Kess v2 5.017 SW 2.23 (green PCB). I can not run the software. Earlier I had such a problem but after moving the SD card everything worked. Now I can not run the software. A message appears. You know how to solve this problem ?


Change USB cable and will be OK

Mario6
29th November, 2018, 08:53 PM
gitko (http://www.digital-kaos.co.uk/forums/member.php/403622-gitko)

Thank you for your reply. Unfortunately, I changed 3 usb cables and went on the same. Maybe the SD card is not working properly or bad soldering. Can someone put an SD image?

heteromies
29th November, 2018, 09:16 PM
Hi. I have a problem with Kess v2 5.017 SW 2.23 (green PCB). I can not run the software. Earlier I had such a problem but after moving the SD card everything worked. Now I can not run the software. A message appears. You know how to solve this problem ?

Are you sure its 5.017? Green PCB is old board, maybe its just 4.036. Check what its is and get correct SD card image.

Mario6
30th November, 2018, 09:11 AM
Yes, I'm sure. This is 5.017 with green PCB (SW 2.23). You can still buy one.

morgano
30th November, 2018, 09:25 AM
Clean sd contacts with isopropyl clean sdreader contacts and tighten them with slim tweezers.

If still not working trash the chinese sd and use good quality one with personal created sd image.

Mario6
30th November, 2018, 11:23 AM
I cleaned and bent the contacts. It did not do anything. I also changed the SD card and uploaded my image backup. Nothing has changed that. I will try to use the warranty from the seller. Thanks for showing interest.