PDA

View Full Version : f10 520d edc17c50 immo off help


Svetiamis
14th November, 2018, 09:40 PM
Hello can someone help me with this,we cloned original ecu and engine start.
After esys flash no start anymore.
Cloned again from original no start.
Can someone make immo off to try,pleaseeeee.
Thank you.
posting k tag al 3 files
Svetiamis
16th November, 2018, 09:10 PM
Someone please
kaleval
16th November, 2018, 11:25 PM
Well, car not start because FEM(CAS)<>DME sync gone. You wrote, first car started -> FEM rolled the code, than re-clone -> DME contains 1 step behind FEM with rolling code.

Use ISTA resync EWS with DME, maybe.
kire106ka
17th November, 2018, 12:09 AM
here is immo off
Svetiamis
17th November, 2018, 06:42 PM
Kaleval,you probably right dont know how to resync ,no option for cas 4 in ista\d
Svetiamis
17th November, 2018, 06:43 PM
Kire106ka,Thank you i will try Monday morning ,let you know after what hapen..Thank you for help.
kire106ka
17th November, 2018, 11:20 PM
i can align cas ecu if you need
Svetiamis
24th November, 2018, 10:27 PM
We make immo off,not working.
Another used ecu immo off not working.
Soldered ori chip on ecu not working..
brend
25th November, 2018, 10:33 AM
Find good Ista-P with I-Com (not OBD net cabel) and reflash this agane and set coding to.
Its must help if SW corrupted.......;)

And how you know like SW trable?



Hello can someone help me with this,we cloned original ecu and engine start.
After esys flash no start anymore.
Cloned again from original no start.
Can someone make immo off to try,pleaseeeee.
Thank you.
posting k tag al 3 files