PDA

View Full Version : Audi A6 3.0 TDI DPF off



firarda
15th November, 2018, 08:17 PM
Hello.

I have an Audi A6 3.0 TDI from 2010 which needs EGR and DPF off.
VCDS says its EDC17G004AG

which software you prefere read and write the data regarding DPF and EGR

Can someone help me?

FlashTune
15th November, 2018, 08:22 PM
what tools do you Have???
if you have kess v2 please just make ecu ID and post here..so i can check if you can read by OBD or Ktag/ bootmode

regards

firarda
18th November, 2018, 10:24 PM
Will do so
thanks

bodzio012
18th November, 2018, 10:51 PM
For sure read and write with boot mode. Then you will have org file 100% good.

firarda
19th November, 2018, 08:10 AM
what tools do you Have???
if you have kess v2 please just make ecu ID and post here..so i can check if you can read by OBD or Ktag/ bootmode

regards

clone ktag and kess v2
(if needed ori vcds)

figani
19th November, 2018, 08:42 AM
I recommend you not to use both...
as you wrote you are from germany...
VAG EDC17... CVN fix...
use ori ktag or ori kess...

when you not have it... try it with ktag clone...
and find someone who will fix CVN before write...

TüV will make you headache at the next HU...












When I helped you press Thanks and Reputation...

firarda
11th January, 2019, 03:23 PM
Hello and happy new year,

so, after a while, have read the ecu, deleted DPF and EGR with the corresponding remover soft. (got from here) and finally made checksum correction via winols.
Could someone check the file for the content?

during this procedure I got some doubts,
I opened original ecu file with the DPF remover, DPF data deleted and saved. Do I have to use this file to delete EGR or is the initial file?

thanks guys

firarda
16th January, 2019, 11:21 AM
can anyone help?