kaleval
15th November, 2018, 09:06 PM
Hi guys,
Today got a car with CAS2 + CA
E91 - 2005
It has a bit strange behaviour, because got 4 keys and only 1 working as expected.
key0: service key - not even get ignition, looks like no detect transponder.
key1: original CA remote key - got ignition, but remote and CA not work
key2: original CA remote key - no ignition, car refuse key
key4: CA remote key - got ignition and CA, remote works fine.
programmed a CA key for key3, expected as will work, for get at least 2 properly working key, but strangely car refuse also that key, as key2.
all key's id verified by VVDI Key Tool.
FVDI says all keys disabled except only key1 enabled.
If I'm right CA only depends on key type bits, and the first 2 CA type could work as CA. All keys should start car. My opinion is that something messed up in EEPROM when (the last) key4 programmed, specially about that part where the blocked / not blocked data contained, but somehow CRC's correct.
Anyone met something like this or can check with some tool the eeprom's dump or should move keys data to other CAS?
Original CAS dump:
https://oc.lacc.hu/index.php/s/GErtiSJNAHhEunW
Today got a car with CAS2 + CA
E91 - 2005
It has a bit strange behaviour, because got 4 keys and only 1 working as expected.
key0: service key - not even get ignition, looks like no detect transponder.
key1: original CA remote key - got ignition, but remote and CA not work
key2: original CA remote key - no ignition, car refuse key
key4: CA remote key - got ignition and CA, remote works fine.
programmed a CA key for key3, expected as will work, for get at least 2 properly working key, but strangely car refuse also that key, as key2.
all key's id verified by VVDI Key Tool.
FVDI says all keys disabled except only key1 enabled.
If I'm right CA only depends on key type bits, and the first 2 CA type could work as CA. All keys should start car. My opinion is that something messed up in EEPROM when (the last) key4 programmed, specially about that part where the blocked / not blocked data contained, but somehow CRC's correct.
Anyone met something like this or can check with some tool the eeprom's dump or should move keys data to other CAS?
Original CAS dump:
https://oc.lacc.hu/index.php/s/GErtiSJNAHhEunW