Svetiamis
16th November, 2018, 09:06 PM
Can someone make immo off no mater if will be errors on dash just to make sure cas is blocking dde.
edc17c50 we make clone from original Infinion tc1979 chip we soldered on another no working ecu just to read flash with ktag was succes.
After that we flashed second hand ecu from ebay.
Car started and after esys flash no more start.Cloned again no puls to injectors and no errors for ews.No any errors for no start exept rail monitoring,pressure is ok on start spray go to 600-700 bar.
Original ecu was burned ,pcb and Infinion somehow survived.
edc17c50 we make clone from original Infinion tc1979 chip we soldered on another no working ecu just to read flash with ktag was succes.
After that we flashed second hand ecu from ebay.
Car started and after esys flash no more start.Cloned again no puls to injectors and no errors for ews.No any errors for no start exept rail monitoring,pressure is ok on start spray go to 600-700 bar.
Original ecu was burned ,pcb and Infinion somehow survived.