Opel astra h

[hanikey1]

Hi to all I want help for read. Ecu airbag for opel astra h I find module in carprog mcu but not same photo any one have pin out for read it with xprog or carprog . Thx

Sent from my SM-G611F using Tapatalk

[megabits]

Hi to all I want help for read. Ecu airbag for opel astra h I find module in carprog mcu but not same photo any one have pin out for read it with xprog or carprog . Thx

Sent from my SM-G611F using Tapatalk

Please enter the central number or post a photo of the label.

[hanikey1]

Please enter the central number or post a photo of the label.MCU : 4L40K https://uploads.tapatalk-cdn.com/20181117/2c6665f35b26e907d5c35ff4e6d7b376.jpghttps://uploads.tapatalk-cdn.com/20181117/5fb17668a0c4b4262666e004c7a0aab4.jpg

Sent from my SM-G611F using Tapatalk

[megabits]

Your pinout...
Credits for @pinn...

[hanikey1]

Your pinout...
Credits for @pinn...Not work

Sent from my SM-G611F using Tapatalk

[megabits]

Not work

Sent from my SM-G611F using Tapatalk

Lift B5...........

[bodzio012]

Did you try by op-com? I ask because op-com done crash by OBD.

[ervinhodo]

the diagram looks good but i cant find ground I'm not very comfort withg this could use some help

[sebage]

If you will scratch the protective paint, at the point indicated in the picture, you will find a copper plate, that is connected to the GND.
But as bodzio012 said, why not try a COM COM, it can be simple and fast through OBD.

[ervinhodo]

I get vcc overload what should i do ? and ye i lifted pin b5 and after i lift VDD