Log in

View Full Version : MB Sprinter



Tonnnnny
20th November, 2018, 03:51 AM
Hi guys... I have a qestion for you...Is this ECU possible to deactivate the immo in? :



A 651 900 32 02 and 03 CRD3.20 OM651




FV 12.16 HW 14.10 PD 16 M03






I would be happy if you can asist me in this...The case is, that my van got an electrical fire....and since i did not have insurance at the moment,i am really in need of to rebuild the veichele my self.. I have been able to do so, but i had to buy a used complete set of ignition lock whit key,also the steering lock... and the ECU from the same car... But when all this is mounted,the starter do not get engaged.... But if i swap,the ECU whit the one that originally was installed in the car,which was the only thing left,since it happen to be placed in the engine compartment,i manage to turn the starter around,and it starts but cuts off after 5-10 secounds..
That makes me think is similaire to IMMO on ...... Look forward to get wiser by this.. Thanks.. Regards Tony

mercis
20th November, 2018, 05:18 AM
no possible

Tonnnnny
20th November, 2018, 11:42 AM
Then, what do it takes to make it run?

Tonnnnny
20th November, 2018, 07:01 PM
I am happy to let you know that you made a serious mistake by misleading me in my qestion for help in here..I have received the information needed to make the ECU play on team by the other components involved,and by bypasing the ECU pincode,the programming was succesful,and my car is now ready for the purpose it was meant for....transportation. Have a GOOD evening