Nissan Micra K12 BCM wipers problem

[i_shot_the_sheriff]

Hello mates ,

I have this Micra K12 at a friend's store ,, This car has problem with wipers . Wipers won't work and it's a problem of the BCM !

If i plug another BCM on the car wipers work! But if i transfer the Eprom from the original BCM to the used BCm ,, the fault it transfered also! So it's an eprom problem.....

I have tried transferring manually with hex some parts of the eprom only ,,, and i have found that the problem lies near the Immo lines :(

The eprom is 95160. Does anyone have a virgin file for this one? Or a solution to fix? Not free of cost of course :)

Cheers

[t77]

Hello ,what type is MCU of BCM? ,maybe u must transfer data from MCU too, if possible .
B.R

[i_shot_the_sheriff]

Forgot to mention.... number is 284B2AX620.

If I leave the used Eprom on the bcm..... car not start but wipers work!! If I transfer original Eprom...
Car starts but wipers won't work.... So I figured out that the Eprom is the fault of the case.....

Sent from my SM-G930F using Tapatalk

[t77]

Ok try like this ....Install used (donor) BCM ...read PIN and try to make a key...If will work ..car start and wipers work.

[i_shot_the_sheriff]

Ohhh so you can just write a key and it works ??? No immo data between ecu and bcm?

Will try tomorrow and report :)

Sent from my SM-G930F using Tapatalk

[Palomablanca]

Hello! you have to initialize the donor bcm with the host ecu, then you have to reprogram the keys of the vehicles, but this you do with an agency or high-end diagnostic tool that makes these functions, but you have to have the security codes of both modules, I hope you can report the work you do.

[i_shot_the_sheriff]

For some reason the client didn't show up ........ i guess he fixed it ! Unfortunately i can't comment on the work because i simply didn't even start doing it :P