PDA

View Full Version : Edc16cp33 after flashing immo problem.



gttuning
23rd November, 2018, 02:31 PM
Hi all x trail edc16cp33 friend flash ecu by obd...with fgtech ori.
tool said injector supported...
After flashed ecu with dpf off car wont start immo problem in ecu ...flashed ori file same..so she killed immo syncro.
Any quick solution..as i mainly do these by bdm.so never had to fix one...any advice on how to get this going would help.
Thanks.

Sent from my SM-G955F using Tapatalk

rafal
23rd November, 2018, 02:40 PM
you lost injectors coding
now you have options:
1- read codes from injectors on paper
2- try use galletto by obd for injector coding ( add manualy in file codes )
3- read eeprom by bdm and add codes to file
4- virgin eeprom and coding by diagnostic

voltechcar
23rd November, 2018, 02:46 PM
what key? keyless or normal. After programing you wait 10 minutes on ignition off?

ASCM
23rd November, 2018, 02:48 PM
u just corrupted eeprom during writing

gttuning
23rd November, 2018, 03:01 PM
i think eeprom is corrupted i dont think they wait10min.as they would follow what ever is on screen.
they have injector coder file as fgtech reads this aswell but if they want to write it by --injector coder CAN---it stops at 50% .
the file is 4kb

voltechcar
23rd November, 2018, 03:04 PM
not think answear on my question. What key?

gttuning
23rd November, 2018, 03:12 PM
not think answear on my question. What key?
key smart but they had key in ignition swith

voltechcar
23rd November, 2018, 03:13 PM
programing again ecu and remove key from car

gttuning
23rd November, 2018, 03:22 PM
programing again ecu and remove key from carI pass the message and will see.

Sent from my SM-G955F using Tapatalk

gttuning
27th November, 2018, 08:24 AM
Non worked...he managed to bdm read and eeprom looks bad...
Can nissan recover this or they need bdm pack..
Thanks

Sent from my SM-G955F using Tapatalk