PDA

View Full Version : Peugeot 206 1.6 HDI U1208 problem



Xtreme0303
23rd November, 2018, 03:56 PM
Hello to everyone, I have a big problem with this car, egr unplugged and two error on the esp, u1208 and C1390, there is the original dump and the no dpf and no egr one, can anyone help me? thanks a lot.

marianro2007
23rd November, 2018, 04:00 PM
Plug the EGR, and those errors should gone.

Xtreme0303
23rd November, 2018, 04:01 PM
also with the egr plugged I have the error and sometimes limp mode at 3000 rpm

Xtreme0303
24th November, 2018, 09:01 AM
no one can help me please?

gege974
24th November, 2018, 09:21 AM
Hi
your file is empty

marianro2007
24th November, 2018, 11:07 AM
no one can help me please?Put again your org flash!

Xtreme0303
29th November, 2018, 09:17 AM
I'm sorry, I've upload it again, my bad...

Xtreme0303
30th November, 2018, 03:12 PM
no one?.... =(

ivanmihov
30th November, 2018, 03:36 PM
plug back ON your egr and write this one

dpf off + egr off

ddnc
30th November, 2018, 06:55 PM
I have 100% tested solution for problem with egr disconnected, esp light off and fully functional without limp... pm if intetested.

Xtreme0303
4th December, 2018, 10:42 AM
I'll Try it in the afternoon and let you now, thanks a lot!!!

Xtreme0303
5th December, 2018, 10:44 AM
Unfortunately nothing to do, ever the same problem, probably the egr is faulty and I need the solution with the plug off, can anyone please help me? thanks a lot

Xtreme0303
13th December, 2018, 08:38 AM
up! need help please...

Ignasvw
13th December, 2018, 08:55 AM
Cut dtc with limp mod and you wont have esp light. egr unpluged

Xtreme0303
13th December, 2018, 02:45 PM
can you help me to do that? thanks

ddnc
15th December, 2018, 02:14 AM
This is not simple egr dtc limp off modification... look at diagnostic real time data and you will see that its messed up and thats why esp function and more are not working...

Xtreme0303
18th December, 2018, 08:20 AM
I have tried everything but nothing to do...

bobolin4o
18th December, 2018, 05:12 PM
I have tried everything but nothing to do...

You didn't try this...
Regards!

Xtreme0303
3rd January, 2019, 04:18 PM
You didn't try this...
Regards!
Sorry for the late, I've just tried the file, at the beginning the esp light was off, later it come again with a few fap error, I've processed the file with volta and removed the DTC and now it seems work perfectly, thanks a lot for your help, you are awesome!