Passat 1.8 20v needs warm up address map!

[ponto33]

Hi!!

I need a help to found the warm up map of Passat 1.8 20v, its possible that is 00B48A, its correct?
And in TLST.0 / TLST.1 (074E8 / 074F6), is just one point? its not a map 1x7? And to decrease injection time have to down or up the point?


thanks!

:)

[icezero2010]

Hi!!

I need a help to found the warm up map of Passat 1.8 20v, its possible that is 00B48A, its correct?
And in TLST.0 / TLST.1 (074E8 / 074F6), is just one point? its not a map 1x7? And to decrease injection time have to down or up the point?


thanks!

:)

u must post ori file without that nobody can help u

best with info about Ecu

hw number

bosch number

software number

[ponto33]

u must post ori file without that nobody can help u

best with info about Ecu

hw number

bosch number

software number

Ok! i will post here!! I will check!

[ponto33]

8d0 907 558 S

0 261 204 956


u must post ori file without that nobody can help u

best with info about Ecu

hw number

bosch number

software number

[ponto33]

now the ecu is immo on!!! I write the immo off file and the immo still block!

[icezero2010]

now the ecu is immo on!!! I write the immo off file and the immo still block!

06f00;Startgrundmenge;1x1
06f0e;Startgrundmenge;1x1
0b48a;Kennfeld für Warmlauffaktor;6x8

[ponto33]

Nice!!

Thanks man!

Startgrundmenge is 16bits right?






06f00;Startgrundmenge;1x1
06f0e;Startgrundmenge;1x1
0b48a;Kennfeld für Warmlauffaktor;6x8

[ponto33]

For the immo off i will open a new topic and will post the original file and the immo off file that i use and still block

http://www.digital-kaos.co.uk/forums/showthread.php/705270-IMMO-OFF-Passat-1-8-20v-ADR-Engine-8d0-907-558-S-0-261-204-956?p=3434564#post3434564

[QUOTE=icezero2010;3431578]

[icezero2010]

For the immo off i will open a new topic and will post the original file and the immo off file that i use and still block

http://www.digital-kaos.co.uk/forums/showthread.php/705270-IMMO-OFF-Passat-1-8-20v-ADR-Engine-8d0-907-558-S-0-261-204-956?p=3434564#post3434564

[QUOTE=icezero2010;3431578]

Yes 16 bit

But I don’t know what u will do ?

I nave never mod this maps also not with 1000 injectors


Gesendet von iPhone mit Tapatalk

[ponto33]

[QUOTE=ponto33;3434561]For the immo off i will open a new topic and will post the original file and the immo off file that i use and still block

http://www.digital-kaos.co.uk/forums/showthread.php/705270-IMMO-OFF-Passat-1-8-20v-ADR-Engine-8d0-907-558-S-0-261-204-956?p=3434564#post3434564



Yes 16 bit

But I don’t know what u will do ?

I nave never mod this maps also not with 1000 injectors


Gesendet von iPhone mit Tapatalk


I run with E100!!

Warm up in E100 needs more 80%+- fuel increasement!

[icezero2010]

Than use grundanpassungskonstante and tvub and lambdacorrectionmap or hfm correction


Gesendet von iPhone mit Tapatalk

[ponto33]

I tried a while in lambdacorrectionmap, but Kennfeld für Warmlauffaktor stay better



Than use grundanpassungskonstante and tvub and lambdacorrectionmap or hfm correction


Gesendet von iPhone mit Tapatalk

[ponto33]

06f00;Startgrundmenge;1x1
06f0e;Startgrundmenge;1x1
0b48a;Kennfeld für Warmlauffaktor;6x8

I change the Startgrundmenge, but the cold start got worse!

Have a way to increase fuel just in cold start?

[icezero2010]

I change the Startgrundmenge, but the cold start got worse!

Have a way to increase fuel just in cold start?
here all what u need

[ponto33]

here all what u need

Thanks so much!!!!

:)

[ponto33]

here all what u need


FKSU.0 / FKSU.1 - 009244 / 00924A ( Abregelung Faktor Kaltstart über Umdrehungszahl )


-------------


KFKSNM.0 / KFKSNM.1 - 00925A / 009280 ( Abregelung Faktor Kaltstart über Drehzahl und


Motortemperatur )


-------------


FKSM.0 / FKSM.1 - 00920E / 009228 ( Kaltstartfaktor )


-------------


FKSWDK.0 00923B ( Kaltstartfaktor abhängig von DK-Öfnung )

[ponto33]

here all what u need

it's all 8bits?

and ignition on idle is Zündwinkelkennfeld im LL?

[icezero2010]

it's all 8bits?

and ignition on idle is Zündwinkelkennfeld im LL?
yes all 8 bit

ignition you don´t need

[ponto33]

here all what u need


my cold start is so good with E100!
But my hot start is not good yet! (the TLST not adjust all, I was decreasing and testing until closed injectors completely and did not starts more, still continued with a bad start
Have a way to increase rpm in hot start? the engine starts "heavy" and start and go to idle RPM, i would like to start go to +- 1.100rpm and go to idle (870rpm)
whats control the idle RPM?


I believe its just it to finalize all!!

:)I was slowing down and testing until I closed my beak completely and did not call anymore, but still continued with a bad match