View Full Version : VW SCIROCCO 2.0 2010 CBDB MT OBD Original wanted
shooting
26th November, 2018, 11:58 PM
Has anyone got an Original dump for a VW SCIROCCO 2.0 2010 CBDB MT - OBD read
Software: 1037564323 - EDC17
wbr
icezero2010
27th November, 2018, 09:13 AM
Has anyone got an Original dump for a VW SCIROCCO 2.0 2010 CBDB MT - OBD read
Software: 1037564323 - EDC17
wbr
check here http://www.digital-kaos.co.uk/forums/showthread.php/682009-Vw-Scirocco-2-0-tdi-140-03L906022R-9980-original-file
shooting
27th November, 2018, 11:04 AM
check here http://www.digital-kaos.co.uk/forums/showthread.php/682009-Vw-Scirocco-2-0-tdi-140-03L906022R-9980-original-file
This is BDM not OBD
wbr
icezero2010
27th November, 2018, 11:16 AM
This is BDM not OBD
wbr
whats the problem its the same ! on area 180000-to end u can use also for obd
shooting
27th November, 2018, 01:11 PM
whats the problem its the same ! on area 180000-to end u can use also for obd
Not the same, but thanks anyway
wbr
icezero2010
27th November, 2018, 01:44 PM
Not the same, but thanks anyway
wbr
Upload your file it Must be the same
Gesendet von iPhone mit Tapatalk
shooting
27th November, 2018, 02:07 PM
Upload your file it Must be the same
Gesendet von iPhone mit Tapatalk
What file? If I had the file I wouldn't need to ask for it... I need Original OBD only
wbr
icezero2010
27th November, 2018, 02:12 PM
What file? If I had the file I wouldn't need to ask for it... I need Original OBD only
wbr
than use that and make from beginn to 17fffff to ff than u have only obd area
but i donīt unterstand why .
every flash tool use sgo files for flashing also that file what i post .
u can use that for flashing as obd !
here only obd area
i dont know why
shooting
27th November, 2018, 02:16 PM
than use that and make from beginn du 17fffff to ff than u have only obd area
but i donīt unterstand why .
every flash tool use sgo files for flashing also that file what i post .
u can use that for flashing as obd !
I don't know what tools you refer to but Kess uses BIN and not SGO
wbr
icezero2010
27th November, 2018, 02:18 PM
I don't know what tools you refer to but Kess uses BIN and not SGO
wbr
yes and kess use converted sgo to bin
and this is the file that postet
icezero2010
27th November, 2018, 02:21 PM
u can also do boot read and than flash over obd is the same
shooting
27th November, 2018, 02:22 PM
yes and kess use converted sgo to bin
and this is the file that postet
Checksums can't be calculated from your file.. it's not the same in many areas of the dump not just beginning..
If you don't have OBD original then you can't help..
wbr
icezero2010
27th November, 2018, 02:30 PM
Checksums can't be calculated from your file.. it's not the same in many areas of the dump not just beginning..
If you don't have OBD original then you can't help..
wbr
than have u a problem with your tool here ori alientech file only different is otp area than the first post and this is not relevant !
i do so many cars and i use many sgos i think u make wrong mods
shooting
27th November, 2018, 02:51 PM
than have u a problem with your tool here ori alientech file only different is otp area than the first post and this is not relevant !
i do so many cars and i use many sgos i think u make wrong mods
Your dump is not OBD...
wbr
icezero2010
27th November, 2018, 03:36 PM
Your dump is not OBD...
wbr
thats enough ! what will u do i do it for u. u dont make tuning .
stage 1 or2 dpf agr off ???
shooting
27th November, 2018, 03:59 PM
thats enough ! what will u do i do it for u. u dont make tuning .
stage 1 or2 dpf agr off ???
I'm correcting a checksum after fixing a tune problem....
I do not see why you are having to know why I need an OBD original...
wbr
shooting
27th November, 2018, 09:47 PM
UP!
Anyone have OBD Original?
wbr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.