View Full Version : Vw golf 4 need immo off ...Siemens 5wp4459
Charlton
29th November, 2018, 05:32 PM
Hello everyone ..
Hope everyone is good today ...
I'm not too sure if someone can help me ...
I'm looking to kill the immo on a golf 4 .16l ecu .
It's using a Siemens ecu and I'm not to sure if we are able to bypass it .
I have attached the flash dump fro. IC. M29F200BB70M6
Any help would be appreciated
Thanking you in advance
Regards
C
kiszka
29th November, 2018, 06:13 PM
...........
Tedum
29th November, 2018, 07:03 PM
you can use search button for other time
write this file to the 93c56 eeprom not on flash
kiszka
29th November, 2018, 07:19 PM
...........
Tedum
29th November, 2018, 07:25 PM
Tedum (http://www.digital-kaos.co.uk/forums/member.php/450061-Tedum) This is the eeprom model
I was thinking simos 2.1 with eeprom version , not noticed
Charlton
30th November, 2018, 09:06 AM
Howsit everyone ...
Thank you so much for all your feed back...
I've had a look at the ecu pcb and I can't seem to find a 8 legged eeprom with 93c56 on it . The cluster eeprom is using 93c86 so I'm not too sure with direction I should take.
Do I write the bypasd file to cluster or ecu?
The customer isn't sure if his file set if from the same car (ecu and cluster ) as he bought it like that as a non runner. The key light was flashing.
I made a key using tango (93c86) from cluster but the key light is still flashing .
I have attached a picture of ecu pcb
Thanx again for all your help
Have a nice day further
Tedum
30th November, 2018, 10:02 AM
Howsit everyone ...
Thank you so much for all your feed back...
I've had a look at the ecu pcb and I can't seem to find a 8 legged eeprom with 93c56 on it . The cluster eeprom is using 93c86 so I'm not too sure with direction I should take.
Do I write the bypasd file to cluster or ecu?
The customer isn't sure if his file set if from the same car (ecu and cluster ) as he bought it like that as a non runner. The key light was flashing.
I made a key using tango (93c86) from cluster but the key light is still flashing .
I have attached a picture of ecu pcb
Thanx again for all your help
Have a nice day further
your ecu doesnt have eeprom so you cant use my dump
Charlton
30th November, 2018, 10:16 AM
Thanx for your reply Ted .Any other suggestions moving forward?
Tedum
30th November, 2018, 08:16 PM
Thanx for your reply Ted .Any other suggestions moving forward?
program your keys
Charlton
1st December, 2018, 08:43 AM
I did program keys but key light still flashing
kiszka
1st December, 2018, 09:24 AM
...........
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.