joseimel
30th November, 2018, 07:44 PM
Hello lads,
I am seeking for help with my Autocom (2 PBC v3.0 red NEC +Bluetoothv2.0) CPU STM32F205ZGT6.
Two days ago the machine arrived from China, I was super happy that I finally I would be able to check my cars, however, everything ends it up in disaster.
I installed the software and driver, the software works OK. When I tried to connect the hardware and I select USB/BT and pressed TEST the software load for a couple on seconds and then nothing happens. It doesn't allow me to do anything else.
However, I decided to try it in the car via Bluetooth and It almost fully worked.
1 Autocom connected to OBD2 ---> Light blue light.
2Connect PC to Autocom --> Paired
3 Software open --> BT search --> OK serial number etc. dark blue lights
4º Test --> around 80% of the process way It stopped light changed back to light blue and process failed.
Any guess what can be the solutions.
Thanks for the read and happy weekend!
I am seeking for help with my Autocom (2 PBC v3.0 red NEC +Bluetoothv2.0) CPU STM32F205ZGT6.
Two days ago the machine arrived from China, I was super happy that I finally I would be able to check my cars, however, everything ends it up in disaster.
I installed the software and driver, the software works OK. When I tried to connect the hardware and I select USB/BT and pressed TEST the software load for a couple on seconds and then nothing happens. It doesn't allow me to do anything else.
However, I decided to try it in the car via Bluetooth and It almost fully worked.
1 Autocom connected to OBD2 ---> Light blue light.
2Connect PC to Autocom --> Paired
3 Software open --> BT search --> OK serial number etc. dark blue lights
4º Test --> around 80% of the process way It stopped light changed back to light blue and process failed.
Any guess what can be the solutions.
Thanks for the read and happy weekend!