PDA

View Full Version : Ford focus edc16 0281015242 bricked to read mpps



cotymoto
4th December, 2018, 10:37 PM
Hi problem with ecu 0281015242. Bricked to read by obd. Now read for bdm good but to try write always error checksum. ( when read backup need send file to alientech for activate to recognize ecu ). Not identify ecu to write and always appear. Try write map. Error. Try write backup error size file. . Need help please thanks you. Have file map oem read for ksuite. Need full file read with ktag correctly I think. Thanks.

Enviado desde mi SM-G950F mediante Tapatalk

alonedark
4th December, 2018, 11:35 PM
briked when you read or when you write, i think when you write , i think you read only partial map by obd and when you write do nt have full file, i think you need full file and write by bmd , thi ecu is 1.6 d edc16c34????? put hw and sw number and you look origina full bdm file and write by bdm

cotymoto
4th December, 2018, 11:50 PM
When write file. With mpps. This car have file original and modify. The 2 read for obd. Now can read with bdm ktag full. But not write. I don't what is the problem . Not identify ecu and appear error file to restore. . What I can do. if you read me full bdm file but do not write because it does not identify ecu

alonedark
5th December, 2018, 12:01 AM
put sw and hw of the ecu, need full flash original

cotymoto
5th December, 2018, 05:41 PM
put sw and hw of the ecu, need full flash originalNeed help the full flash ktag ecu 0282015242 ford. How put sw and hw of the ecu. I can read. But not write bdm. Not understand. https://uploads.tapatalk-cdn.com/20181205/5d0609b227a32482e73aa690bffec12c.jpg

Enviado desde mi SM-G950F mediante Tapatalk

carmageddon
5th December, 2018, 07:52 PM
write here SW number or send here your readout

ASCM
5th December, 2018, 08:09 PM
BDM FORMAT

cotymoto
5th December, 2018, 08:53 PM
write here SW number or send here your readoutThe hw is 0281015242 and soft. 1037395209. Now send all read in backup. https://uploads.tapatalk-cdn.com/20181205/7b9df2cb0e953bedb7fe958cb1c2bab2.jpghttps://uploads.tapatalk-cdn.com/20181205/acd37baa28dbc6177b149c6c3fc7f8d7.jpg

Enviado desde mi SM-G950F mediante Tapatalk

alonedark
5th December, 2018, 08:59 PM
Héroe You have, write flash file by bdm https://www.digital-kaos.co.uk/forums/showthread.php/677038-Ford-focus-1-6tdci-2008-edc16c34-bdm-problem-395209-028105242?highlight=1037395209

cotymoto
5th December, 2018, 09:04 PM
here have all backup read with ktag friend. the problem is not recognize ecu but i can read, not understand

alonedark
5th December, 2018, 09:09 PM
you have flash file of the ecu bad , need write by bdm flash file, you can try whith ktag but i dont khow if ktag works, only need flash file , you have partial flash in ecu need full file

alonedark
5th December, 2018, 09:13 PM
if you compare in hex you flash file and the other one you can see ,you have many FFFFF and the other one you have the file for example here

577527

immokill
5th December, 2018, 09:30 PM
I had same problem flash was erased partial you need full flash to write with bdm 100 not over obd In my case software was saved but maps area was all FF FF . So full flash with same soft number +cks and write via BDM .
Regards

cotymoto
5th December, 2018, 10:06 PM
if you compare in hex you flash file and the other one you can see ,you have many FFFFF and the other one you have the file for example here

577527This car has been deleted by dpf more than 1 year ago and that's why I have OEM Flash. but I can not write it because it does not recognize the ecu and I see the image that e Sent. someone can help with full bdm. Hw and soft. Thanks friends.

Enviado desde mi SM-G950F mediante Tapatalk

cotymoto
5th December, 2018, 10:07 PM
I had same problem flash was erased partial you need full flash to write with bdm 100 not over obd In my case software was saved but maps area was all FF FF . So full flash with same soft number +cks and write via BDM .
RegardsYou how solvent this problem inmokill

Enviado desde mi SM-G950F mediante Tapatalk

immokill
5th December, 2018, 11:53 PM
I writed with bdm100 flash . Find same software vesrsion and write flash via bdm with bdm100 . You need software version as your identical . I writed only with bdm100 another tool ktag , didnt recognize ecu.

mexanico1971
6th December, 2018, 01:15 AM
Or use Xprog

macako6
6th December, 2018, 02:20 AM
here you have full BDM
this is read by the BDM100

cotymoto
6th December, 2018, 03:08 PM
here you have full BDM
this is read by the BDM100 Thanks friend. With your file and with bdm 100 working good. Yet read and write flash good. The car start yet [emoji16][emoji16][emoji16][emoji16][emoji16][emoji16][emoji16][emoji6][emoji6][emoji6][emoji6][emoji6]

Enviado desde mi SM-G950F mediante Tapatalk

immokill
7th December, 2018, 09:06 PM
I told you mate BDM100 is best for edc16

Glad you solved