OPEL COMBO 1.3 MJD6JO IMMO OFF

[perfido]

help me i need immo off file
is a 95320

[ZAHEER]

here immo off mate

[perfido]

here immo off mate
no work ... bad dump

[alexandrosts]

Give this a try and report if it works for you dont forget to thanks

[vilin]

English only !!!

[vilin]

Hello everyone, help figure it out, on my Opel Combo you need to turn off the immo, here is the file that I read from the engine control unit, using Kess, is it possible to disable the immo in this file?

[vilin]

Hello everyone, tell me how and how to calculate the EEPROM dump from the MJD block 6j0.c6


Opel Combo-C 1.3 CDTI
HW: MAG 01246JO01D
SW: 1414C588
VIN nr .: W0L0XCF2563063362
SW ver .: 0006
Spare: 55194020 YW
Engine: Y13DT

[tothzsolt]

test and report

[vilin]

Thanks, I will check and write tomorrow.

[vilin]

The test showed that the engine does not start, does not enter the diagnostics, the scanner does not see the ECU.
Here is my original 95320 file.629117

[vilin]

The test showed that the engine does not start, does not enter the diagnostics, the scanner does not see the ECU.
Here is my original 95320 file.

[tothzsolt]

test and report 2 diferent file,probe test

[tothzsolt]

2 diferent file probe test and report

[vilin]

Thanks, I will test.

[vilin]

test and report 2 diferent file,probe test

original.op.combo.95320 immo off.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=629135&d=1561026229)

This file does not start the car.
Tomorrow I will test the next file.

[vilin]

original.op.combo.95320 6f immo off
Hello everyone.

Bravo!!!!!

On this file, the car started up immo disabled.Thank you so much.

[vilin]

Hello everyone, the car stopped again, I’ve attached a file that was read after the machine’s failure, this file is different from the file that was loaded.

[Panathaole]

the immo solution works for 10 times, and then immo engage again....

you have to put one line from the original eeprom to your immo off solution to work, but i don't remember which one....... (maybe 8c....)

[vilin]

629866
the immo solution works for 10 times, and then immo engage again....

you have to put one line from the original eeprom to your immo off solution to work, but i don't remember which one....... (maybe 8c....)

Thanks for the answer, someone on the forum can tell more precisely?