PDA

View Full Version : opel astra z14xe dtc erase



kophiphi
5th December, 2018, 05:47 PM
Hello
Please help opel astra 1.4 z14xe delco ecu dtc erase .
dtc p0105 . I modified dtc table, but I got this error P0000
Please help correct dtc off.
thanxxx

Yura123
5th December, 2018, 09:22 PM
pass pm

Thanks+Rep

kophiphi
6th December, 2018, 10:22 AM
hello
thanx help, file does not work car no start.

Yura123
6th December, 2018, 02:00 PM
file correct

kophiphi
6th December, 2018, 02:34 PM
hello
motor start , few seconds car motor stop.

Yura123
7th December, 2018, 08:13 PM
P0105 - MAP Circuit Malfunction

This is a problem due to the sensor. I deleted the error, but there is a problem in the car.

kophiphi
7th December, 2018, 09:51 PM
Hi,
The car’s motor works but when I give speed the car is draging. I checked and found no failure. When I disconnect the map sensor the motor works good. Changed the map sensor but at speeding the motor is draging again.
What you wrote about erase the failure worked by z16xe motor. But at this ecu when I use the content that you modified it doesn’t work. It starts with your content but some seconds later it stops. With the content that I attached and made the motor works with this error: p0000 and motor check lamp lights and the original dtc code disappeared. That’s all.

Nik436
9th January, 2022, 02:10 PM
Hi,can you share some info about the DTC table in these ECUs? I'm trying to create a def so I can tune my car