PDA

View Full Version : BMW F15 KEY HUF5767 433MHZ NOT WORK AFTER VIRGINIZE



achaccha
6th December, 2018, 01:19 AM
Dear Friends
I have problems to virginize the key of a BMW X5 2015 F15, I have tried to virginize THE KEY HUF5767 433MHZ using VVDI key tool, AVDI. But after programming the vehicle only the engine turns on by hitting the key to the emergency antenna, the presence or the remote does not work.
Can someone tell me what tool should I use to properly virginize?
thank you for your comment

rob h
6th December, 2018, 10:36 AM
Chinese key, or org?

drugowaz
6th December, 2018, 12:29 PM
These keys not posibe virgin with your tools

achaccha
6th December, 2018, 02:05 PM
Rob h: The key is used original
Drugowaz: Which tool should I use to virginize an original bmw key used HUF5767 433Mhz, so that the presence and the remote function correctly?

kaleval
7th December, 2018, 08:46 AM
Read somewhere original keys works only with CAS4 system after renewal due to firmware issue...
Use aftermaket keys, also can get cheap and working fine.... eg autokeys.us, just determine correct freq, since got 3 kind from 433Mhz...

achaccha
13th December, 2018, 12:32 AM
can someone tell me where I can buy new keys for FEM / BDC HUF5767 434Mhz, I need to buy keys that work the presence and remote perfectly.
Thank you

Maartinj
13th December, 2018, 01:33 AM
is possible to unlock
Soon Keytool will have that proper file too
is already tested and confirmed

Locksmith Hungary
13th December, 2018, 08:53 AM
"ß$¤ßłpúőpúßßłŁ$ßßłjáßßłßł$×÷łŁł¤ß=

rob h
11th October, 2019, 01:38 PM
Hello guys,

I tried renewing org Huf5767 keys.
Using keydiy handheld, and vvdiprog. And the tested Pcf79xx files are all the same.
The car, 118i 2014 with a huf5767 key, needs one extra key.
I could program the renewed, to start. Keyless and remote failed.
The remote does send out a signal affter renewel.

Barracuda should be able to created good renewed keys.

I read that the fem unit, can be swthed to a differnet signal, like 315mhz 434 or 868.
And i came a cross 2 different 434 keys, the huf5767 and the huf5663.

Can i switch the fem setting between these 2 434mhz so the keys i buy from china always work?
Some chinese keys advertise with hu5767, but most are non labeled.

reks13
19th October, 2019, 02:39 PM
434mhz not one HUF5767, its 2 types: slow and fast