PDA

View Full Version : Caddilac cts 2004 immo error



drugowaz
6th December, 2018, 10:26 AM
Hi. Guys anyone familiar with error b0996


After flat battery car not start. No starter. All info i found thant problem in ecu or ecu data mismatch.

Anyone know the solution?


Car is 3.2 petrol

2004

droidwayne65
6th December, 2018, 02:42 PM
Hi. Guys anyone familiar with error b0996


After flat battery car not start. No starter. All info i found thant problem in ecu or ecu data mismatch.

Anyone know the solution?


Car is 3.2 petrol

2004
It's doing a VIN verification check. Disconnect then reconnect the battery, turn the ignition on, without trying to start the car, wait about 10 minutes until the theft light goes out. If the only prior problem was a dead battery, it will start after that. :)

drugowaz
6th December, 2018, 03:11 PM
Great :)
Somowhere saw similar advice run through my eyes.