Seat Leon 1.4i P0402 is still after egr off

[WinWoj]

Hi Folks,

I remove egr, in Seat IAW4MV, but after few days P0402 dtc came back. Please help me to delete it permanently.

Best regards

[Summa]

Post the Original file as well.

[pike]

Hi,
not want to attach original?

[WinWoj]

Sorry, I had ori in another laptop, so I find it now and attach.

[pike]

you see what you attached?

[WinWoj]

What a shame :crushed: I was dazed

Here original, sorry for that

[bobolin4o]

What a shame :crushed: I was dazed

Here original, sorry for that


Flash this file, it is your original file with only DTCs off, the checksum is ok.
Blank the EGR with metal plate.
If you disconnect the EGR plug, there will be an error about "EGR basic setings not performed", but the MIL will be off...

Oups... i've forgot the file...
Here is it!

[WinWoj]

Flash this file, it is your original file with only DTCs off, the checksum is ok.
Blank the EGR with metal plate.
If you disconnect the EGR plug, there will be an error about "EGR basic setings not performed", but the MIL will be off...

Oups... i've forgot the file...
Here is it!

Hi Bobo, unfortunately car didn't start with this file. Even check engine light not light, like bad soldering, but I test connection few times.. Will try with ori and your again, but I'm afraid that something wrong in your dump. BR

[konq100]

Try my solution.
CRC OK.

[WinWoj]

Hi friends,

It was not cs problem but file from wrong ecu (first installed). Now I attach file which starts car ok, but this P402 problem. Please check this.

Winols swapped bytes and after conversion I don't know programmer will write file good.

BR

[draganelektricar]

hello.EGR Actuator plug have be disconnected.
pass.pm

[Shusun]

u ll never get read of that DTC. if u check is not even in flash! had 3 of them like this

[WinWoj]

u ll never get read of that DTC. if u check is not even in flash! had 3 of them like this

What does it mean?

[WinWoj]

hello.EGR Actuator plug have be disconnected.
pass.pm



Car doesn't start. As I saw, many differences with 04-read.bin which working with P0402

[draganelektricar]

hello. ver 2.
pas.pm

[WinWoj]

Could somebody tell me, why, when I open not checksum Ed file in winols, then export them after checksuming, output file contain only 00 values?

[WinWoj]

Could somebody make me P0402 and p0401 off with good checksum?? Still nothing working...

[bobolin4o]

Could somebody make me P0402 and p0401 off with good checksum?? Still nothing working...

Flash this file.
DON't touch anything!!!

BTW... P0402 and P0401 are not present in the DTCs structure, so they can't be erased from the file.
BTW2... P0402 is made to P0000 as i saw just now, so your file is not ORIGINAL... AGAIN...
Any way, my file should be ok.

[konq100]

Could somebody make me P0402 and p0401 off with good checksum?? Still nothing working...

If you still need delete DTC - P0401, P0402, P0404 - let me know.
Regards!

[WinWoj]

If you still need delete DTC - P0401, P0402, P0404 - let me know.
Regards!

Yes, P0401 came back after 100km driving... Very confused.. The problem thic ecu can't read/write via obd.. Only flash programmer :/

[bobolin4o]

Yes, P0401 came back after 100km driving... Very confused.. The problem thic ecu can't read/write via obd.. Only flash programmer :/

China FG4 read and write this ECU just fine.
China KESS read and write it, but corrupt ECU coding in writing. VCDS in help...

[WinWoj]

No, Kess can't read this for me

[bobolin4o]

Ok, flash this file, if you want... with desoldering.