View Full Version : IVECO 3.0 HPI TCO off
Disconnected
7th December, 2018, 11:03 AM
Hello, i need TCO off for iveco daily tacho is broken and car is in limp mode.
greyg
8th December, 2018, 09:40 AM
You must remove tacho from bsi.
Disconnected
9th December, 2018, 07:59 AM
i need to read bsi ?
greyg
9th December, 2018, 12:35 PM
Yes, tacho is stored in 2 places in BSI. Then proxi alignment. There is a speed limiter in edc. You also connect yellow tacho plugs.
Disconnected
10th December, 2018, 11:02 AM
Here is file from BSI - 95320
Disconnected
10th December, 2018, 11:26 AM
And BDM read from ecu
greyg
10th December, 2018, 02:15 PM
It's not everything. You must do Proxi on car via obd.
Disconnected
10th December, 2018, 02:43 PM
Ok thank you for help but i already solve the problem.
sasy90
11th November, 2019, 10:20 AM
how you solve?
Makson4eg
22nd January, 2020, 06:48 PM
HI ALL. May be someone have solution for tco off in bsi?
death9891
7th September, 2021, 03:06 PM
Hello, I need the help of the tachograph off
iveco 3.0 2011r edc17cp52 and bsi / bsm 95640
alonedark
7th September, 2021, 08:08 PM
try this
832979
death9891
8th September, 2021, 09:40 AM
try this
832979
but still turn off the BSI 95640 tacho
I'll do the alignment after OBD
greyg
8th September, 2021, 06:21 PM
You have 3 positions in BCM to change.
death9891
9th September, 2021, 08:55 AM
yes but i don't know which items exactly? Please exclude 3 items directly in the file 95640?
greyg
9th September, 2021, 10:08 AM
I don't share. Just hinting.
death9891
11th September, 2021, 01:01 PM
Please help me change 95640 bcm tacho off
przemyslav
22nd September, 2021, 09:47 PM
Please help me change 95640 bcm tacho off
Bit too late.
If You still need solution try this.
Pass pm.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.