Mercedes Vito w639 edc16 DTC OFF

[aqua_life]

Hello,


I have Mercedes Vito w639 with ECU A6111535379
Engine starts but don´t pass 3000rpm and don´t pass 40km/h
I have error P1617 - eeprom coding
I tested another eeprom file I found on forum for this ECU and don´t have error P1617, but obviously don´t start.

Can someone repair my eeprom or just disable DTC on flash file ?

I have the ECU on the bench, so I can try many files quick.


Thanks for your help

[boberek5]

buddy, some new eeprom made on virgin

[sisco1]

Hello friend I worked the eeprom file with software, it should be ready for das, if you try to let you know if you solve it or not

[aqua_life]

I tried your file but I still have error P1617.
Or is your file virgin ready to code ? Only changed some bytes...
It is difficult to code this ECU with virgin file ?

Thanks for your help

[figani]

I tried your file but I still have error P1617.
Or is your file virgin ready to code ? Only changed some bytes...
It is difficult to code this ECU with virgin file ?

Thanks for your help


write virgin to eeprom...
use DAS for adaption...

[sisco1]

[QUOTE = aqua_life; 3443307] Ho provato il tuo file ma ho ancora l'errore P1617.
O il tuo file è pronto per il codice? Solo alcuni byte modificati ...
È difficile codificare questa ECU con file vergine?

Grazie per il tuo aiuto [/ QUOTE]

I think you should try to sync with das, as the user says Figani, (sorry I have no direct experience)

[aqua_life]

Any more ideas to solve this problem ?
Is it possible to delete error code on flash ?


Thanks for your help

[omarino]

hi
try this

[aqua_life]

Thanks for your file.
I tested and engine light is OFF, no error codes.
However engine is in limp mode. Don´t pass 3000rpm and 30km/h.

Any idea more ?

[Meat-Head]

Can you try filling EEPROM with ff or 00
recode immboliser, (if it will) then transfer the data line by line onto the LEECHED file.

Thus elminated t fault and then runs?