View Full Version : Mercedes Vito w639 edc16 DTC OFF
aqua_life
8th December, 2018, 10:05 PM
Hello,
I have Mercedes Vito w639 with ECU A6111535379
Engine starts but donīt pass 3000rpm and donīt pass 40km/h
I have error P1617 - eeprom coding
I tested another eeprom file I found on forum for this ECU and donīt have error P1617, but obviously donīt start.
Can someone repair my eeprom or just disable DTC on flash file ?
I have the ECU on the bench, so I can try many files quick.
Thanks for your help
boberek5
8th December, 2018, 10:38 PM
buddy, some new eeprom made on virgin
sisco1
9th December, 2018, 12:23 AM
Hello friend I worked the eeprom file with software, it should be ready for das, if you try to let you know if you solve it or not
aqua_life
9th December, 2018, 05:44 PM
I tried your file but I still have error P1617.
Or is your file virgin ready to code ? Only changed some bytes...
It is difficult to code this ECU with virgin file ?
Thanks for your help
figani
9th December, 2018, 05:46 PM
I tried your file but I still have error P1617.
Or is your file virgin ready to code ? Only changed some bytes...
It is difficult to code this ECU with virgin file ?
Thanks for your help
write virgin to eeprom...
use DAS for adaption...
sisco1
9th December, 2018, 06:21 PM
[QUOTE = aqua_life; 3443307] Ho provato il tuo file ma ho ancora l'errore P1617.
O il tuo file č pronto per il codice? Solo alcuni byte modificati ...
Č difficile codificare questa ECU con file vergine?
Grazie per il tuo aiuto [/ QUOTE]
I think you should try to sync with das, as the user says Figani, (sorry I have no direct experience)
aqua_life
10th December, 2018, 12:29 PM
Any more ideas to solve this problem ?
Is it possible to delete error code on flash ?
Thanks for your help
omarino
10th December, 2018, 10:18 PM
hi
try this
aqua_life
13th December, 2018, 03:12 PM
Thanks for your file.
I tested and engine light is OFF, no error codes.
However engine is in limp mode. Donīt pass 3000rpm and 30km/h.
Any idea more ?
Meat-Head
13th December, 2018, 03:16 PM
Can you try filling EEPROM with ff or 00
recode immboliser, (if it will) then transfer the data line by line onto the LEECHED file.
Thus elminated t fault and then runs?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.