View Full Version : Traction control light on after remapp
Jimmy07
11th December, 2018, 01:20 PM
Hello All
Done a Ford Transit with a Stage 1 map from a reputable dealer using Dimsport genius. Van is 2014 read ECU no problem wrote map to van no problem after a few hours TC light came on. This has happened twice now with Transits but not any other vehicle.
Any ideas why this is happening?
Thanks in advance
MVRH
11th December, 2018, 04:23 PM
Is light on and reduced power
icezero2010
11th December, 2018, 04:39 PM
Hello All
Done a Ford Transit with a Stage 1 map from a reputable dealer using Dimsport genius. Van is 2014 read ECU no problem wrote map to van no problem after a few hours TC light came on. This has happened twice now with Transits but not any other vehicle.
Any ideas why this is happening?
Thanks in advance
post file ori and mod
than can we check !
Jimmy07
11th December, 2018, 08:31 PM
No plenty of power just light on it’s happened twice now both Transits ?
Meat-Head
11th December, 2018, 08:38 PM
Tc light normally on if upset with ecu
see if will wheel spin when light on and code read
Jimmy07
11th December, 2018, 08:52 PM
Thanks meathead will do. Strange just Transit vans does this nothing else
Meat-Head
11th December, 2018, 10:00 PM
Is it possable road test,
stick to speed limit drive sensibly
then give it large, see if cones on with boooost
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.