PDA

View Full Version : Traction control light on after remapp



Jimmy07
11th December, 2018, 01:20 PM
Hello All

Done a Ford Transit with a Stage 1 map from a reputable dealer using Dimsport genius. Van is 2014 read ECU no problem wrote map to van no problem after a few hours TC light came on. This has happened twice now with Transits but not any other vehicle.
Any ideas why this is happening?

Thanks in advance

MVRH
11th December, 2018, 04:23 PM
Is light on and reduced power

icezero2010
11th December, 2018, 04:39 PM
Hello All

Done a Ford Transit with a Stage 1 map from a reputable dealer using Dimsport genius. Van is 2014 read ECU no problem wrote map to van no problem after a few hours TC light came on. This has happened twice now with Transits but not any other vehicle.
Any ideas why this is happening?

Thanks in advance

post file ori and mod

than can we check !

Jimmy07
11th December, 2018, 08:31 PM
No plenty of power just light on it’s happened twice now both Transits ?

Meat-Head
11th December, 2018, 08:38 PM
Tc light normally on if upset with ecu

see if will wheel spin when light on and code read

Jimmy07
11th December, 2018, 08:52 PM
Thanks meathead will do. Strange just Transit vans does this nothing else

Meat-Head
11th December, 2018, 10:00 PM
Is it possable road test,

stick to speed limit drive sensibly

then give it large, see if cones on with boooost