S2PM-382 immo off please helppp

[alexandrosts]

Hello,
I did check all posts and i did not found anywhere any info so i diceted to open a new thread
i am stuck with this car and customer like always needs it yesterday.

car came to me with water damage on bsi, crank but no start situation, i did a vin reprograme on old bsi with abrites and car fired up normaly soonest i disconect abrites from bsi car loseses communication and want start , checked bsi water damage, i purchased a new bsi and i swaped eprom 95160 put n bsi in car want start , checked vin it had some figuers there but no vin , did programe vin but car steel want start and i get immo code under ecu .
I thought i was going to be done fast with this so i told customer that will be ready

and now i am stuck please if any solution to disable imobilizer please help i will post file soon

[alexandrosts]

after some reserche online i realize that there is no luck with removing immo off this ecu, correct me if i am wrong,
so i will focus on repairing this mess.
Now please advise, the bsi i have on car i can programe vin and new pin with abrites no problem on the other hand now if i read eprom on ecu and i set vin and pin same as bsi will it start?

[antwnhszr]

after some reserche online i realize that there is no luck with removing immo off this ecu, correct me if i am wrong,
so i will focus on repairing this mess.
Now please advise, the bsi i have on car i can programe vin and new pin with abrites no problem on the other hand now if i read eprom on ecu and i set vin and pin same as bsi will it start?Hi do you have lexia??????if yes mske virgin the donnor bsi and make coding

Στάλθηκε από το POCOPHONE F1 μου χρησιμοποιώντας Tapatalk

[alexandrosts]

I will try that and will report actually i will need to make bsi virgin first i will upload dump here if anyone can help

[baltazar3]

Post EEPROM of engine ECU here

[alexandrosts]

here you go this is ep 95080

[alexandrosts]

problem solved car immo removed and rpm adjust with lexia.If anyone need info for same issue please pm me

[ikara]

No steering power,no rpm when immo off

[alexandrosts]

hello,steering all good, issues with rpm and i was able to adjust details with lexia, i had several other issues with this car due to bad reading with Chinese carprog, but everything went well after all, so yes i did use the s2000 immo off set up, they said no immo off for this ecu but it worked fine for me, i did try a few different files before make it work ... if need file i have it available, and i will make a pdf on how to adjust rpm with diagbox

[alexandrosts]

i am not sure how helpful will be but i didn't found any actually helpful info for this ecu and i may open a topic for it on how to immo off and i will upload file as well

[adelnooh]

I have sagem s2pm-385 as a replaced for another ecu... peugeot 206 1100cc ... i want to make immo off or solve the problem of bsi and ecu not-matching by lexia or any way.
Any hint i will appreciate it.

[Zmann]

206 1.1L should not use Sagem but Magneti Marelli. Post first 8 digit of VIN can tell.

[adelnooh]

so i cant replace magneti mareli IAW 48P2 with Sagem s2pm ?

[Zmann]

All 48P2's are cable throttle and all S2PM's are motorised throttle ECU.