PDA

View Full Version : Vectra C pin code from CIM module


Positron2200
15th December, 2018, 10:13 AM
Hi Dears.
Please need correct PIN code or virgin file for CIM module, Vectra C. I have read the MCU 2J74Y in 3 differents modes.

Thanks in advance. Best Regards.
XMEN004
15th December, 2018, 11:00 AM
Los lectores no son buenos
Bllinda
15th December, 2018, 11:06 AM
read the other MCU
Positron2200
15th December, 2018, 03:27 PM
Dears, I think this original file is corrupt, becouse when I connect with scanner tool, some information like Vin and calibrations date, etc, appears with out correct order and characters. Is possible that somebody send me please a virgin file or file with know pin code.
rafal
15th December, 2018, 05:59 PM
use search and you will find on dk
Bllinda
15th December, 2018, 06:07 PM
If you want to experiment then you ... (https://www.digital-kaos.co.uk/forums/showthread.php/452752).
Positron2200
17th December, 2018, 04:56 PM
Hi Dears. Now I have readed the other chip. Sorry, but I was confused about what chip read. Here is the other chip:
Bllinda
17th December, 2018, 09:00 PM
.... .... 1657
Positron2200
17th December, 2018, 11:13 PM
what mean this dear, have not code stored?
Bllinda
18th December, 2018, 01:17 AM
See also the same and you will see ....
And do not forget to hit the buttons


what mean this dear, have not code stored?
Positron2200
18th December, 2018, 02:05 AM
See also the same and you will see ....
And do not forget to hit the buttons

Dear, can you set the code 1657 in the dump for me please?
Positron2200
21st December, 2018, 06:08 PM
Dear I donīt understand your help
bank
24th December, 2018, 09:01 AM
1657 is code from dump.
You can reset unit with opcom using this code and then program with code from car
Positron2200
26th December, 2018, 05:40 AM
1657 is code from dump.
You can reset unit with opcom using this code and then program with code from car

Hi. You mean that this code 1657 is already inside of my DUMP?
bank
26th December, 2018, 07:13 AM
Hi. You mean that this code 1657 is already inside of my DUMP?

Yes, this is what I mean
Positron2200
26th December, 2018, 10:00 PM
Yes, this is what I mean

Dear. Before reading the file, I tried to reset it with that code using Op-com, and I got the wrong code message.
bank
26th December, 2018, 10:02 PM
Dear. Before reading the file, I tried to reset it with that code using Op-com, and I got the wrong code message.
Did you check if security wait time is inactive before reset?
Positron2200
27th December, 2018, 01:35 AM
Yes, the cim had 20 minutes of security time but I waited for that time and then it was not active anymore, so I tried to do the reset and even the wrong code appeared. That's why I thought the file was damaged
bank
27th December, 2018, 03:38 PM
Use another one scaner. Code is correct
Positron2200
28th December, 2018, 07:51 PM
Use another one scaner. Code is correct

Thanks Dear. I will do it.