need dump for vw gamma3

[nany]

hello every body can someone give me the dump for vw gamma3 made by philips with eeprom 24c16 thanks in advance for your help:)

[PremierD]

hello every body can someone give me the dump for vw gamma3 made by philips with eeprom 24c16 thanks in advance for your help:)

I'll check tomorrow mate.. .if you don't get one by then....

[rafcio363]

Gamma 3 have two memory.
But there isn't 24c16 if I good remember.
Philips_Gamma3.zip (http://www7.zippyshare.com/v/48835122/file.html)

[djdansmart]

You need special hardware for this..look here! I think work only in win 98!

[nany]

sorry it s a mistake about for me ,you have a reason there is an 24v02 and 24c04 for this mod?le thank you foryour help my freind RAFCIO363

[nany]

hello mr rafcio i think its not the same with my caradio ,it have tmp47c800 but your dump its for tmp47c860n so when i take the dump its not accepte the code can you give another with the tmp47c800 if you have thank you a lot in advance for your help

[yasser]

Program for windows 98 works PERFECT, BUT
you have to use computer with max cpu speed 100MHz,
so you have to find some old pentium 1 or 486 max 100mhz.

I make tryes on 4 computers and the slowest was pentium on 90Mhz.

[nany]

thank you my freind because i have windows xp i cant to do this !!!! this is why i need a dump it easly

[yasser]

You wrong.
Real problem on this radio is that CODE is not in dump of eeproms.
Code is in MCU, you can't read is, so you need to make code research interface and use this program.

There is other way to decode this radio.
It is funny way, but BELIEVE ME, before years I made much radios in that way.
It will work OK until you disconect power suply. After that you have to do procedure again :-(

So. How it is:
1.Connect power suply.
2.start radio - on display "SAFE"
3.find battery 1.5V
4 connect + battery to cng of radio.
5. gnd of battery make quick tounch to oscilator of MCU
you can make 2-3 quick tuchest per second.
6. If radio stop shows something then disconect pover and then again begin from step.1

This radio can be done about 10-20 seconds.

Good luck

[dr3amx]

4 connect + battery to cng of radio.
5. gnd of battery make quick tounch to oscilator of MCU
you can make 2-3 quick tuchest per second.

Can you explain to me no4. the cng of radio and no5.?