bugarcek
18th December, 2018, 09:02 AM
Tuesday,18,December,2018,08:58:07:04354
VCDS Version: Release 18.9.0 Running on Windows 7 x86
www.Ross-Tech.com
Address 09: Cent. Elect. Labels: 1K0-937-08x-09.clb
Control Module Part Number: 5K0 937 086 AA HW: 5K0 937 086 AA
Component and/or Version: BCM PQ35 M+ 122 0186
Software Coding: 610A0A3A8025086F088800829000096003800C88424FAD00E4 8087000041
Work Shop Code: WSC 35110 377 00146
VCID: 73E5DCC5C2A42AD2D8-8026
1 Fault Found:
01518 - Bulb for Back-Up Lights; Left (M16)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 139
Mileage: 8835 km
Time Indication: 0
Date: 2007.14.20
Time: 15:04:24
Freeze Frame:
Term 15 On
Voltage: 11.40 V
ON
ON
ON
OFF
OFF
I get car like this... when I get it there were alot of errors, but now only upper one... But it is wierd because all bulbs are okay, wires also...
On left light there is rear fog light, which works and on right side there is reverse light, which also works.
Can code this somehow? Can I turn this bulb failure light off for all lights?
VCDS Version: Release 18.9.0 Running on Windows 7 x86
www.Ross-Tech.com
Address 09: Cent. Elect. Labels: 1K0-937-08x-09.clb
Control Module Part Number: 5K0 937 086 AA HW: 5K0 937 086 AA
Component and/or Version: BCM PQ35 M+ 122 0186
Software Coding: 610A0A3A8025086F088800829000096003800C88424FAD00E4 8087000041
Work Shop Code: WSC 35110 377 00146
VCID: 73E5DCC5C2A42AD2D8-8026
1 Fault Found:
01518 - Bulb for Back-Up Lights; Left (M16)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 139
Mileage: 8835 km
Time Indication: 0
Date: 2007.14.20
Time: 15:04:24
Freeze Frame:
Term 15 On
Voltage: 11.40 V
ON
ON
ON
OFF
OFF
I get car like this... when I get it there were alot of errors, but now only upper one... But it is wierd because all bulbs are okay, wires also...
On left light there is rear fog light, which works and on right side there is reverse light, which also works.
Can code this somehow? Can I turn this bulb failure light off for all lights?