PDA

View Full Version : HardCut RevLimiter (PopCorn) EDC16



g5n14
19th December, 2018, 05:55 PM
Hello guys!
Trying to do the HardCut rev limiter on EDC16C34 (Focus 1.6 TDCI 90 HP SW 1037382741)
Modified the TL Map in the way:
4000 NORMAL
4010 0 torque
5100 0
5200 0

The revs are now limited to 4000 but there is no sound. Straight pipe from turbo. What do i miss?
I think it has something to do with the DURATION map, but i'm unable to find it.

Explanation is even better then the modified file, but file would be also great!
THANKS A LOT!
ATTACHED THE STOCK FILE.

Power2Go
20th December, 2018, 12:04 AM
change 4010 to 4001 and try it

mancioks
20th December, 2018, 12:14 PM
Try this one. It's between 4000-4002rpm. You can mod gap bigger if you need for the sound.

mancioks
20th December, 2018, 12:28 PM
Second try this is SVRL limiter. pass same as first file's.

g5n14
20th December, 2018, 12:33 PM
Second try this is SVRL limiter. pass same as first file's.
I was just about to stay home and surround myself with some Christmas bullshit. And now wearing garage cloths and heating up the car to make this shit go brapbrap)))

One question, I was trying to find the SVRL byte using the VAG method (string ends with 32), but couldn’t. Which method you used to find it?

mancioks
20th December, 2018, 12:41 PM
I found it using Damos, but not sure it will work same as Opel or VAG :)

mancioks
20th December, 2018, 03:14 PM
Okay, where are result? :D did ot worked? :D

g5n14
21st December, 2018, 07:09 AM
Okay, where are result? :D did ot worked? :D
I will reply today after test. My friend took the flasher and I was unable to try yesterday.

g5n14
21st December, 2018, 11:19 AM
Okay, where are result? :D did ot worked? :D
Ok, it worked, but I was doing it totally wrong (changing only one map). 4002 is a little too fast so I changed it to 4010 and will check the result now. Will post a video. Can you tell me which maps is those you changed? Looks like gear dependent limiters or duration, but can’t understand because I lack the experience. Or may be you can share a damos?

g5n14
21st December, 2018, 11:23 AM
4010 is also a little too fast, will try 4020... will play with the sound and post the end product)

g5n14
21st December, 2018, 12:09 PM
So, after playing for a while i stopped at 4025. Perfect job, mancioks, worked great! Unfortunately there is no pops, but I guess after fitting the bigger exhaust it will work whole lot better(or maybe we can achieve better result on that exhast?). Car is waiting for big turbo upgrade, so I will refresh the topic after that is done together with big exhaust.

here is the video (not a SVRL, haven’t even tried)
https://youtu.be/iCN4BnVxKX0

g5n14
21st December, 2018, 12:11 PM
Do you have any idea how the launch control can be done at this ECU? Is it even possible?

maajkii
21st December, 2018, 01:03 PM
00050 05300 - SVRL in every VAG EDC16uXX ecu.... easy to find. look for it in 16bit HiLO

g5n14
21st December, 2018, 01:04 PM
it's Ford... dunno if it works same.

mancioks
21st December, 2018, 09:31 PM
Nice that is working. These maps ar Nm to IQ :) Why you not tried SVRL version i sent? If it works, sound should be better :)

g5n14
22nd December, 2018, 01:34 PM
I will try it soon and report the result! Thanks a lot!

AKH84
11th February, 2019, 05:34 PM
the SVRL version works?

heniekstodola
1st May, 2020, 01:54 PM
Hey. Will you provide the password for the file?

F4STuning
1st May, 2020, 06:38 PM
Hey. Will you provide the password for the file?
Hello, post your file here, sameone will do for you.

heniekstodola
1st May, 2020, 11:27 PM
Here is the file. I need cutoff at 4000 rpm - thanks

chrisimerk
2nd May, 2020, 12:35 AM
Here is the file. I need cutoff at 4000 rpm - thanks

here you go hardcut set at 4000

test and report
pass in pm

heniekstodola
2nd May, 2020, 10:13 PM
Hello. Tomorrow will pack into the driver and let me know.

heniekstodola
3rd May, 2020, 03:16 PM
Hey. The cut does not work. The engine is screwed to about 4500 rpm and you can't hear pop and bang. I have removed the dpf and sports muffler on the pass so something is not programmatically. What could be the reason?

chrisimerk
3rd May, 2020, 03:23 PM
Possible my file I'll have a look at it mate

motocrazy
3rd May, 2020, 05:08 PM
here you go hardcut set at 4000

test and report
pass in pm
hardcut 4000
pass pm

chrisimerk
3rd May, 2020, 05:19 PM
Hey. The cut does not work. The engine is screwed to about 4500 rpm and you can't hear pop and bang. I have removed the dpf and sports muffler on the pass so something is not programmatically. What could be the reason?

try this one

same pass

heniekstodola
3rd May, 2020, 05:20 PM
I don't feel calm in the pictures. The table with a value of 4000 rpm is 2264. After 4000 rpm it is 4500 and it should not be 4001? and then the value 0.

chrisimerk
3rd May, 2020, 05:25 PM
yeah you can try that thats what i have been playing around with i used them TL on the 2.0hdi and it works so i have used the same solution with yours

test mine and motocrazy file see what it does

regards

heniekstodola
3rd May, 2020, 06:04 PM
I opened your file in the program and there are no changes in the torque limiter. This is probably a mistake because ECM Titanium does not recognize it in the driver database.

motocrazy
3rd May, 2020, 06:08 PM
You install and try. This is a svrl limiter. You can't see Ecm either. :)

heniekstodola
3rd May, 2020, 06:10 PM
I opened your file in the program and there are no changes in the torque limiter. This is probably a mistake because ECM Titanium does not recognize it in the driver database.

motocrazy
3rd May, 2020, 06:11 PM
You install and try. This is a svrl limiter. You can't see Ecm either

heniekstodola
3rd May, 2020, 06:17 PM
You install and try. This is a svrl limiter. You can't see Ecm either. :)
Approx. I need some time. I will test and let you know. Today I have loaded my ecu 5 times for bdm, I hope that he will survive a few more

heniekstodola
3rd May, 2020, 07:24 PM
You install and try. This is a svrl limiter. You can't see Ecm either
You are great! Works great at 3950rpm cuts off. Say in which part of the map is it done? I want to convert the torque limiter map to 30% or will it not affect SVRL?:guns::guns::guns:

heniekstodola
3rd May, 2020, 07:36 PM
Unfortunately, your mod doesn't work. The engine spins to 5000 rpm. Motocrazy gave a good solution that works great at 3950rpm. Thank you for your time. Now I want to combine my mod with Motocrazy mod to enjoy the potential of this engine.:beer:

motocrazy
3rd May, 2020, 07:55 PM
use on nice days.:beer:

chrisimerk
3rd May, 2020, 08:21 PM
glad you found a good solution keep up the good work motocrazy

motocrazy
3rd May, 2020, 08:27 PM
thank you bro .