Skoda Superb 2.0 TSI 220HP - Simos 18.6 - P060C

[kubuswujo]

I have problem with Skoda Superb 2.0 TSI 220HP with ECU Simos 18.6
After flashing it and taking a ride i sometimes got an error:

P060C00 (Internal Control Module Main Processor

On ori file no problem with this fault.
Car has only 30 000 Kilometers milage..
I flash it with OBD using MAgpro.

Ori file in atachment.

The problem is in file or in car?

[mprog]

Maybe CRC problem

[kubuswujo]

Checksums are calculated by MAgpro and car does not schows checksum fault problem one time you can ride 10 min and it appear other time you need to drive 50 min.

When it appear i got EPC Lamp on dash and limp mode.
after restarting a car everything ok.


What is strange car does not got in limp when you accalerate strong, more when you accelerate moderate or slowly.

[voltechcar]

to 99% its crc problem, the same show gpec2 when we flashing ecu x17. Try use other tool

[kubuswujo]

since yesterday its possible to read write this ecu using boot/bench protocols i will take ecu out then and read full maybe it will help
I have also Ktag ori but it does not do this ecu yet

[icezero2010]

since yesterday its possible to read write this ecu using boot/bench protocols i will take ecu out then and read full maybe it will help
I have also Ktag ori but it does not do this ecu yet

i´m sure wrong mod in file