Bmw tacho F serie

[ecupro]

Hello everyone, BMW tacho F serie by retrofiting from standard to 6wa tacho, what need to be done VIN change is enough in new tacho, or coding also, many thanks.

I have this one;

582038


Want to upgrade with this one from f10(its same);
582040


Any info for coding, or only VIN change, thanks.

[raf0468]

from my knowledge dash has to be modified to 0 miles then coded in with bmw tool which can can write vin and adapt to the car..

[ecupro]

from my knowledge dash has to be modified to 0 miles then coded in with bmw tool which can can write vin and adapt to the car..
Can I manually change VIN and miles, can e sys done that, donor dash is from bmw f10, I want to put in f25 x3, think need to change dump with one from f25, thanks;

[raf0468]

not done it myself personally, but here is some detail info should give you idea of the procedure..
thx to the author
good luck..

[ecupro]

not done it myself personally, but here is some detail info should give you idea of the procedure..
thx to the author
good luck..


Thanks man, I wait now for donor cluster then I try that, many thanks