PDA

View Full Version : ECU MJD-8F3.Q9 Crash



TOINO
23rd December, 2018, 06:37 PM
hello mates fiat fiorino 1.3 multijet engine no start def 1054
plesae clear crash

mjd 8f3.q9 eprom 95640rt

joker01
23rd December, 2018, 10:33 PM
try this friend, non testato.report .....

or do this procedure .....



turn the ignition key to MAR;
activate the right-hand indicator;
deactivate the right-hand indicator;
activate the left-hand indicator;
deactivate the left-hand indicator;
activate the right-hand indicator;
deactivate the right-hand indicator;
activate the left-hand indicator;
deactivate the left-hand indicator;
turn the ignition key to STOP.

TOINO
24th December, 2018, 12:16 PM
already tried the two solutions but none works
already tried the two solutions but none works

TOINO
24th December, 2018, 12:20 PM
tested 2 solutions engine d ont work in the dash say "switch crash actived"

joker01
24th December, 2018, 12:36 PM
fuse and rel่ it s ok.......
the ecu airbag is clear??

TOINO
24th December, 2018, 05:13 PM
yes air is clear , but in diagnostic i have def 1054 inertial switch actived

joker01
24th December, 2018, 07:16 PM
I do not know how to help you ..... at this point you have to find a backup e2p of your ecu do virgin and try ......
sure it's not hidden somewhere ???

TOINO
25th December, 2018, 06:48 PM
is not hidden, I have read the manual of the car, this switch is digital! I'm thinking that maybe my air bag is not clear enough, you can not leave an error in the engine calculator, I'll also go to the ECU body if I can do something! then I keep abreast of the results

TOINO
5th January, 2019, 11:45 PM
solved with a manual to other ignition on
the bliker right on, after this blinker off
right blinker on after 10 times , cut ignition , ignition on car start

dream7000
1st December, 2021, 04:57 PM
hi Toino, the procedure doesn't work for me either, I turn on the key, the right blinker flashes, the engine doesn't start, as you managed to do

Vladimir.zheurov
1st December, 2021, 05:30 PM
If the right blinker flashes, turn right blinker, the left turn signal starts blinking,
turn on the left turn signal and then the car prompts what to turn on.
After completing the procedure, turn off the ignition.
Switch on the ignition and if nothing flashes, start the engine.
If the turn flashes again, the procedure is not complete - repeat all over again.
Fair for all Fiat after 2008 year and new Chrysler.

dream7000
2nd December, 2021, 09:06 AM
thank you very much, I try