View Full Version : Bmw e90 320d 163 hp edc16c35 need ori bdm files
Duleee
24th December, 2018, 07:33 PM
Hello guys, need ori bdm files for this hw / sw:
edc16c35
HW: 0281014575
SW: 1037389882
Can anybody help..?
Thanks
voltechcar
24th December, 2018, 07:36 PM
this number its not enought, upload your flash I check.
Duleee
24th December, 2018, 08:02 PM
This is kess read:
HW: 0281014575
SW: 1037389882
VIN nr.: WBAVC31040VG16087
SW ver.:
Spare:
Engine:
HW Ver.:
SW upg.: 07809448
Installation:
Thanks
voltechcar
24th December, 2018, 08:32 PM
this file is orginsl, because you need bdm?
Duleee
24th December, 2018, 08:38 PM
Reworked kess fail at writing at 0% now car don't start, checksum was goodalso voltage near 14....
voltechcar
24th December, 2018, 11:12 PM
so read bdm this ecu and upload file, I paste your obd flash and car start.
Duleee
24th December, 2018, 11:23 PM
Bdm flash is totally incomplete
Here you go, thanks for helping
voltechcar
25th December, 2018, 12:13 AM
again, I need flash bdm. Where you saw flash in this package?
Duleee
25th December, 2018, 12:24 AM
I can try to read again, this was flash with name "flash" but its probably corrupted ...
Be right back, will try again to read
voltechcar
25th December, 2018, 12:43 AM
because you use k-tag. Use galetto or other and read this flash.
Duleee
25th December, 2018, 01:42 AM
I tried 10 time and saw you message,no done it with bdm 100
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.