PDA

View Full Version : BMW 335D E90 M35080 WHERE IS MILEAGE


MEH
7th December, 2009, 01:54 AM
HI EVERYBODY

I WANT TO KNOW WHERE IS MILEAGE IN THIS DUMP AND HOW MANY KMS THERE ARE INSIDE?

bmw 335 D E90 YEAR 2006


thanx in advance
lupu_sandu
7th December, 2009, 08:07 AM
Like all bmw km are stored in first 2 lines (00 to 0F)
Stored value: 101952km or 203904 km.
On E90 you must reprogram CAS.
MEH
7th December, 2009, 12:52 PM
Like all bmw km are stored in first 2 lines (00 to 0F)
Stored value: 101952km or 203904 km.
On E90 you must reprogram CAS.

there are just two memories stored in bmw????dash and cas??

what is cas???

im french and i do just renault and peugeot citroen usually

and im new in dash

thank you my friend for your answers
MEH
7th December, 2009, 07:05 PM
ITS ALRIGHT

I've 101952kms

i must change all the 18 e4???
PremierD
7th December, 2009, 09:06 PM
ITS ALRIGHT

I've 101952kms

i must change all the 18 e4???

After you change the M35080 for a new one that is mate ....:idea:
MEH
7th December, 2009, 10:20 PM
After you change the M35080 for a new one that is mate ....:idea:

I ALREADY DO THAT

THANKS A LOT
drpeter
8th December, 2009, 09:50 PM
I ALREADY DO THAT

THANKS A LOT


Don't forget to program CAS to 0km!
MEH
13th December, 2009, 01:11 AM
OK I WOULD LIKE 79 500 KMS
PremierD
13th December, 2009, 11:46 AM
OK I WOULD LIKE 79 500 KMS

13 68 .......mate ..or put this in
MEH
13th December, 2009, 02:39 PM
thanks a lot my friend i wil try this
crzyfngrz
21st December, 2009, 11:28 AM
Hey mate please help:
I have a 2001e39 with the m35080 chip. I need to reprogram the mileage and bought the ETL programmer. When I view the dump its all zeros. Please tell me how to proceed
didi_du_93000
27th July, 2010, 10:07 PM
Hello,

are you sure the mileage is stored just in dash and CAS?
no in GPS, in ECU, in light module...

Thanks
pinky1970
27th July, 2010, 10:57 PM
when reprograming the cas and it saids lights on and lights off, does it mean head lights.
didi_du_93000
27th July, 2010, 11:01 PM
Thanks for your reply Pinky1970,

But in ECU and DTC no mileage recording?
z786
27th July, 2010, 11:15 PM
when reprograming the cas and it saids lights on and lights off, does it mean head lights.
wat machine r u using?
pinky1970
28th July, 2010, 07:15 AM
UNI Tacho 2008.
didi_du_93000
26th February, 2011, 02:17 AM
Anyone can help me for to know where is mileage except in dash, CAS.
How can i erase the service? (i have PA soft 1.3.6 and INPA K+CAN)

Thanks a lot.
Harrycz44
26th February, 2011, 11:17 PM
Anyone can help me for to know where is mileage except in dash, CAS.
How can i erase the service? (i have PA soft 1.3.6 and INPA K+CAN)

Thanks a lot.

You can do it with X-prog m programmer. In Dash better use new EEprom M35080. Erase service??= iDrive for new model or old model with DIS= U can use Inpa onterface..
didi_du_93000
1st March, 2011, 07:42 PM
with X-prog m i must lift a pin on CAS3?
how can i erase the service with my INPA?
i don't have DIS with my inpa.
teerak2uk
1st March, 2011, 08:21 PM
not sure if xprog will do cas3 reliably make sure you get a good backup
Speedosoft
4th March, 2011, 09:29 AM
Didi_du_93000 all BMWs store mileage in the DME (ECU). Most DMEs built by Siemens or continental will clear the old value as you drive the car for a couple of miles or tens of miles but not all of them. If the DME is a Bosch then it's a problem because it will never clear by itself. Basically if a fault (DTC) occurs the KM value associated with it will be the old one.