View Full Version : Passat Me3.8.2 TLST.0 / TLST.1 problem
ponto33
27th December, 2018, 03:37 AM
Hi!!
I have a problem with TLST.0 / TLST.1!
Difficult hot start! I change the values of TLST.0 / TLST.1 but nothing changes! I decrease the TLST.0 / TLST.1 but the hot start gets even more difficult!
When TLST.0 / TLST.1 have a original value, to hot start i have to press the trottle and the engines starts. But when decrease the TLST.0 / TLST.1, the engine not start!
All values that i change in TLST.0 / TLST.1 dont work!
why??
The TLST.0 / TLST.1 is the last thing that i need to correct to make the funcional file!
Thanks
:)
icezero2010
27th December, 2018, 11:39 AM
Hi!!
I have a problem with TLST.0 / TLST.1!
Difficult hot start! I change the values of TLST.0 / TLST.1 but nothing changes! I decrease the TLST.0 / TLST.1 but the hot start gets even more difficult!
When TLST.0 / TLST.1 have a original value, to hot start i have to press the trottle and the engines starts. But when decrease the TLST.0 / TLST.1, the engine not start!
All values that i change in TLST.0 / TLST.1 dont work!
why??
The TLST.0 / TLST.1 is the last thing that i need to correct to make the funcional file!
Thanks
:)
your injectors wrong calibrate !!!
and lambda corrections is on disable it !
ponto33
28th December, 2018, 12:21 AM
your injectors wrong calibrate !!!
and lambda corrections is on disable it !
I used to calibrate TVUB and FGATO.
In wot, with maximum turbo pressure the value that i read is 0.90v. I used FGATO to adjust it, and the idle and medium loads i used TVUB to adjust.
After make it, i changed the TLST.0/1, and then more i decrease, worse the hot start!
ponto33
28th December, 2018, 07:09 PM
your injectors wrong calibrate !!!
and lambda corrections is on disable it !
The FKSM.0 / FKSM.1 cause impact on TLST?
FKSM have a cold start and hot start part?? Like in Me7.1 FKSTT.
Because i increase all FKSM map! Maybe its cause problem in TLST!
ponto33
3rd January, 2019, 03:42 AM
your injectors wrong calibrate !!!
and lambda corrections is on disable it !
I try all that i can make!
I try to reduce in Heiß Startanhebung too, but not work!
In TLST i just have to edit Startgrundmenge or start b2 faktor too?
I use 550cc injectors, I reset TVUB to original and decrease FGATO to 50% and LTFT on idle is -1.2%.
if i put TLST and Heiß Startanhebung in original values, the engine starts hot when i press the throttle, but if i decrease 5% / 10% / 20% or more its the same thing and not starts when i press the throttle pedal!
I dont know what i can make to solve it!
But if I reduce the fuel pressure to 2bar the engine starts hot!!
icezero2010
3rd January, 2019, 09:34 AM
I try all that i can make!
I try to reduce in Heiß Startanhebung too, but not work!
In TLST i just have to edit Startgrundmenge or start b2 faktor too?
I use 550cc injectors, I reset TVUB to original and decrease FGATO to 50% and LTFT on idle is -1.2%.
if i put TLST and Heiß Startanhebung in original values, the engine starts hot when i press the throttle, but if i decrease 5% / 10% / 20% or more its the same thing and not starts when i press the throttle pedal!
I dont know what i can make to solve it!
But if I reduce the fuel pressure to 2bar the engine starts hot!!
i can only write what i have write 2 times your injector rescale is wrong !
have u no simulator ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.