trivilin8
27th December, 2018, 08:07 AM
Hello, I'm trying to install an Ecu to a VW pick up Amarok, hardware number on ecu is the same as it should be, but software number isn't. I have a friend that has odisE working and helped me try to do the jub, but when we try to flash it it keeps saying that in the container the picked flash hasn't been found any valid flash session valid for the selected control unit which is engine controller.
I wonder if here's theres is a guy that could open odis flash files to modify compatibility values and make it work. The hardware of both ecus are 03L 907 309 AC, but vehicle's software is 03L 906 012 BB and the Ecu I purchased is 03L 906 012 GM. The errors that displays is the follow. I hope some could help me.
Thanks in advance https://uploads.tapatalk-cdn.com/20181227/abdcaa4c8e0367a12bc74ed521f0b442.jpg
I wonder if here's theres is a guy that could open odis flash files to modify compatibility values and make it work. The hardware of both ecus are 03L 907 309 AC, but vehicle's software is 03L 906 012 BB and the Ecu I purchased is 03L 906 012 GM. The errors that displays is the follow. I hope some could help me.
Thanks in advance https://uploads.tapatalk-cdn.com/20181227/abdcaa4c8e0367a12bc74ed521f0b442.jpg