PDA

View Full Version : Help with BRICKED ecu MED17.5



benjamin77140
30th December, 2018, 04:17 PM
Hi friends, as the recommendation of :


A quick search returned that there are tools that can bypass Tprot. I think CMD would be one of them. It also looks like none of your Kess attempts were successful hmmm...In which case I'd say that you triggered the protection.

I am inclined to believe the ECU is bricked and your best guess would be to post your ECU details + problem description in the Chip Tuning section. Those guys know their stuff and maybe someone will be able to bring it back to life.

I'll send you the details of the rework master in the PM later on.

Im here to figure out if any one of you guys can help to bring back to life my ECU
Iv post a similar thread on an french forum, somone got a "solution" but want me to pay off..

Here original link of the thread : https://www.digital-kaos.co.uk/forums/showthread.php/708756-Burnt-MED17-5-KessV2-clone-china-Audi-TT-1-8-tfsi-2008-tc1766-(immoOFF-)-(Clone-)-fix
583375

No more communication odb kess and vcds.. Car not working at all
No communication KTAG Boot mode pinout too
Thnks for any help

vitaliyl
30th December, 2018, 04:34 PM
Use ODIS Engineering for repair ecu.

benjamin77140
30th December, 2018, 04:45 PM
Use ODIS Engineering for repair ecu.

I mate thanks for your help could explain a little more about that procedure ?
Thanks; do i need VAG online servers ? If yes i don't have any acces

A3fDevil666
30th December, 2018, 05:26 PM
Odis e and flashfile from Disk

morgano
30th December, 2018, 06:50 PM
If OBD comms are dead, and boot mode with ktag is unresponsive, I guess the ecu got died. Will need replacement.

benjamin77140
1st January, 2019, 04:24 PM
I would like to try odis e but haven't got
im actually trying a read with fvdi bootmode

kuebk
1st January, 2019, 10:23 PM
If ecu is OBD dead ODIS is not going to help you. If BOOT is dead too, get a replacement ecu

benjamin77140
1st January, 2019, 10:43 PM
I dont really know if boot is dead but ktag and kess wont get ECU ID
Maybe try galetto v54 write clone or something

anyway to check tricore activity ? i gués with oscilloscope and canbus decoder