View Full Version : Audi A4 1.6 Simos3 Decat
PawelR17
30th December, 2018, 09:06 PM
Hi
I need to delete O2 sensor after cat.
I was trying Swiftec but no success.
Thanks
draganelektricar
30th December, 2018, 09:39 PM
hi. disconnect connector.
pas.pm
PawelR17
30th December, 2018, 09:43 PM
Many thanks!
PawelR17
31st December, 2018, 02:01 PM
Hi
Not working
Fault:
17526 - Oxygen (Lambda) Sensor Heating; B1 S2
P1118 - 009 - Open Circuit
PawelR17
2nd January, 2019, 09:22 AM
Anyone can help?
voltechcar
2nd January, 2019, 09:32 AM
Anyone can help?
this write......
PawelR17
2nd January, 2019, 10:24 AM
Still same fault :crushed:
bobolin4o
2nd January, 2019, 10:38 AM
Have MIL?
Regards!
PawelR17
2nd January, 2019, 10:39 AM
Yes MIL On
bobolin4o
2nd January, 2019, 10:46 AM
Flash this, you will have P0000, without MIL...
Read and erase errors after flashing...
PawelR17
2nd January, 2019, 12:26 PM
Same problem
:mad-new::mad-new::mad-new::mad-new:
bobolin4o
2nd January, 2019, 12:34 PM
Same problem
:mad-new::mad-new::mad-new::mad-new:
Still P1118?
NO WAY!
raceshadow
2nd January, 2019, 12:55 PM
Use this. It is good solution. :smug:
https://www.asc-tuningimports.cz/files/prod_images/temp_big/celfix2.jpg
voltechcar
2nd January, 2019, 01:08 PM
read dtc with eobd, yeah good solution to cat but no heater sonda problem.
PawelR17
2nd January, 2019, 01:43 PM
Yes still same fault.
This is very weird,
I campare files after writing (write mod file than read it again and compare)
Everything looks ok.
Errors reading via VCDS
PawelR17
2nd January, 2019, 02:06 PM
Yes I know about this solution, but O2 sensor must working.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.