P0610 Error on MAZDA 3

[2me]

I have a Mazda 3 BK 1.6 Z6 with Denso ECU 279721-2240 (1st picture) and Z601 100140-7041(2nd picture) .

Speed indicator is not working and odometer does not record mileage while CHECK ENGINE light is ON and I get the P0610 DTC.
Also, I can't delete this DTC if the engine is not at least halfway warmed-up.
When temp is let's say over 60C, I can clear this DTC and all things will work normally until I let the car cool down more than 6 Hours, then the nightmare starts again.

Can this be a hardware problem, because it's linked to the engine temp ?

584292584293

[gege974]

Hi

posted
here your 94c56 file file please?

[2me]

Hi

posted
here your 94c56 file file please?


Hello. I am sorry for the late answer, but I had some trouble with my programmer and I had to buy a new one .

Here is my original 93c56 dump : 585907


Thanks for help !

[2me]

Issue is fixed. Thanks gege974

[gege974]

Hi
thanks for your return

[bobasspr]

Hi guys. I have this same problem on Mazda 3 p0610.
I post my 93c56. Tahnk You.586917

[2me]

PM bobasspr (https://www.digital-kaos.co.uk/forums/member.php/369953-bobasspr)

[Ringo24]

Hi guys.
Please repair my dump. DTC P0610
thanks in advance

[janusz21]

see pm Ringo24 (https://www.digital-kaos.co.uk/forums/member.php/473824-Ringo24)

[bladeus]

HI guys,
I have the same problem with error P0610, who of you can help me?

[takles]

HI Mates,
I have Mazda 3 petrol 1.6 lt. with code P0610. Car drives fine but with check light solid on. Can somebody help me fix this ? I have attached eprom data from ecu 93c56. Many thanks in advance.

[zi0m3k]

Hello
I have the same problem with my ecu, dtc P0610. Maybe someone can help me ?
Best Regards

[janusz21]

tray this bin pass pm

[zi0m3k]

Thank you very much, working fine now.

[steppke74]

I have this same problem with my Mazda3 with (p0610).
Maybe someone can help me ?
Thanks and Regards.

[janusz21]

see pm and tray

[Lanike71]

Hi,

I am a new user from Greece and a driver of a Mazda 3 with the same problem...Because I am a noob, what is the 93C56 file?
Does this solve the problem and if yes, what hardware or software is needed?

Thanks in advance.

[SLAWEK666666]

Hello, I have the same problem, can you help me solve it?

[Cic2000]

Hello

Same problem here... Speedo doesn't work, DTC on

Can someone help, please?

Thank you and BR

C

[Cic2000]

Problem solved...

Thanks to gege974

[nagybela]

Hi guys.
Please repair my dump. DTC P0610
thanks in advance

[tunceroto]

Merhaba @gege974

Aynı sorun ...

Speedo çalışmıyor, DTC temiz

Birisi yardımcı olabilir mi lütfen?

yardımın için teşekkürler..

693853

[tunceroto]

@gege974@ Hello

Same problem here...

Speedo doesn't work, DTC clear

Can someone help, please?

Thank you for help..
693854

[morgano]

@gege974@ Hello

Same problem here...

Speedo doesn't work, DTC clear

Can someone help, please?

Thank you for help..
693854


Try this one ;)

Hope it works for you.

[morgano]

Hi guys.
Please repair my dump. DTC P0610
thanks in advance

Hi.

Try with this eep mate.

Good luck.

[morgano]

Hello, I have the same problem, can you help me solve it?

Hi.

Here file for you. ;)

Good luck.

[tunceroto]

[QUOTE = Morgano; 3806112] Merhaba.

İşte sizin için dosya. ;)

İyi şanslar. [/ QUOTE]


Thank you for help

Perfect Working :)

[Suprasss]

Hello.I have code P0610.Speedometer doesnt work. Can someone help please?698567
Thanks

[morgano]

Hello.I have code P0610.Speedometer doesnt work. Can someone help please?698567
Thanks

Here fixed eeprom, this is one time help for you, not acceptable being here since 2 years and only 2 posts. COME AND HELP OTHERS WITH YOUR SKILLS next time no help with your statistics on forum. Be warned.

[Suprasss]

Here fixed eeprom, this is one time help for you, not acceptable being here since 2 years and only 2 posts. COME AND HELP OTHERS WITH YOUR SKILLS next time no help with your statistics on forum. Be warned.

Thanks mate.I appreciate it. I already repaired it.Your solution is same as mine. I joined 2 years ago so that i can read posts and learn about programming. Much work had me forget i joined here.I will try and help others wherever i can now

[drDelirium]

It's my first post.
I have this same problem with mazda 3 1.6. DTC P0610, speedometer and odometer don't work. How to fix it ?
Can anyone help me ? Please
I attach 93C56 image.



Problem solved. Many thanks for the kiszka

[sanchos]

Hello
Please fix P0610
spedo dont work
after erase fault by obd speedo work .
Big Thx
BR

[ecuprogramer]

sanchos (https://www.digital-kaos.co.uk/forums/member.php/223197-sanchos)
not eeprom for dtc error code off ,please uplod ori flash file for help you

[sanchos]

I want to fix some other user.

[morgano]

Hello
Please fix P0610
spedo dont work
after erase fault by obd speedo work .
Big Thx
BR

Can't see a problem in the eeprom dump, sorry, think you must search elsewhere

[gogost]

Hi guys. I have this same problem on Mazda 3 p0610.
I post my 93c56. Many thanks.

[adikson]

Hi,
Can i hask for repair eep mazda 3 1.6 P0610 ?

[mario990]

Mazda 3 ECU 279721-2240
indicator is not working and odometer does not record mileage while CHECK ENGINE light is ON and I get the P0610 DTC.
guys
Please repair my dump. DTC P0610
thanks in advance

[morgano]

Mazda 3 ECU 279721-2240
indicator is not working and odometer does not record mileage while CHECK ENGINE light is ON and I get the P0610 DTC.
guys
Please repair my dump. DTC P0610
thanks in advance

Here, test this one.

[Randex]

hello,

Please help, Same problemon Mazda 3 , P0610 and no Speedomenter, Permanent error

THX IN ADVANCE

[kiszka]

hello,

Please help, Same problemon Mazda 3 , P0610 and no Speedomenter, Permanent error

THX IN ADVANCE

press buttons
https://mega.nz/file/FjRmSArC

[Randex]

kiszka (https://www.digital-kaos.co.uk/forums/member.php/69387-kiszka)
https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/statusicon_blue/user-offline.png

thx man , Tomorow i will test the file and come with feedback !!

THX AND REP ADDED

[kiszka]

kiszka (https://www.digital-kaos.co.uk/forums/member.php/69387-kiszka)

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/statusicon_blue/user-offline.png

thx man , Tomorow i will test the file and come with feedback !!

THX AND REP ADDED
always press buttons after checking in advance
but it should be fine

ok I'm waiting

[Randex]

always press buttons after checking in advance
but it should be fine

ok I'm waiting

hi, IT WORK, no error on ecu and speedo is working , THANK YOU

[nikolov123]

hi , i have this dump for repair
dtc p0610 , on '04 mazda 3 1,6 petrol

[nikolov123]

please need help with this dump

[kiszka]

please need help with this dump
press buttons if all is ok
https://mega.nz/file/drpVHKYa

[adikson]

MR. kiszka can i also pelase for help with my dump (posted some posts before) ?

[morgano]

Hi,
Can i hask for repair eep mazda 3 1.6 P0610 ?

Your file.

Good luck

[kiszka]

Hi,
Can i hask for repair eep mazda 3 1.6 P0610 ?


MR. kiszka can i also pelase for help with my dump (posted some posts before) ?

press buttons
https://mega.nz/file/AnAAFKLC

[peugeotexpert]

hi
please help me
mazda3 p0610 error
thanks

[kiszka]

hi
please help me
mazda3 p0610 error
thanks
pres buttons
https://mega.nz/file/UnogXaCQ

[madman47]

Hello,
Can you check this dump please for P0610 error
Many thanks

[kiszka]

Hello,
Can you check this dump please for P0610 error
Many thanks
test and report give me
https://mega.nz/file/gjoUAaYZ

[madman47]

Thanks but still same error sorry


Sent from my iPhone using Tapatalk

[Cic2000]

Dump is ok....change eeprom chip

[morgano]

Hello,
Can you check this dump please for P0610 error
Many thanks

Try this one, strange kiszka file haven't worked. Maybe some other problem.

[kiszka]

Try this one, strange kiszka file haven't worked. Maybe some other problem.
whenever I think that this sea does not work I write, test it

[madman47]

Thanks for the reply, I will test this file as advise

[sefo2222]

Hello everybody,
I am new here, can I ask you for repair eep Mazda 3 BK, 1.4, 2004?
Engine light on, speedometer not working.
Error P0610.
Thank you very much.

745682

[roquete]

Hello, i have too one mazda at the workshop with P0160, i do the correct configurations and CHK ENG goes off for a few kms then after stoping the car CHK is on again and speedometer stops working.
Car is Mazda 3 ,year 2005, ecu 279721-2240
Here is file in 8 and 16 bit if someone can help me,
Tanks.

[morgano]

Hello everybody,
I am new here, can I ask you for repair eep Mazda 3 BK, 1.4, 2004?
Engine light on, speedometer not working.
Error P0610.
Thank you very much.

745682

Your file fixed.

[morgano]

Hello, i have too one mazda at the workshop with P0160, i do the correct configurations and CHK ENG goes off for a few kms then after stoping the car CHK is on again and speedometer stops working.
Car is Mazda 3 ,year 2005, ecu 279721-2240
Here is file in 8 and 16 bit if someone can help me,
Tanks.

Your file fixed

[manolo123]

BUENAS SALUDOS PASE POR FAVOR GRACIAS

[sefo2222]

Thanks to morgano.
It looks that finally P0610 is solved.

[Kalectro]

Hi please my speedo also not working. Can you help me?
My ecu is 279721-2240 mazda 3 y 2005.
Thank you in advance.
Here is the file.

[ADG]

Hello could somebody help me to repair this 93c56 dump??

only when engine is cold i get P0610 and speedo is not working

[Kalectro]

Solved!!! With new dump

[Labtech24]

hi
Please help me with Mazda 3. I have P0610 adn speedo not working

Solved - thanks

[werni21]

Can i please hellp with wrong eeprom on my mazda 3 279721-2240

[morgano]

Can i please hellp with wrong eeprom on my mazda 3 279721-2240

Here

Try this one ;)

Go improving your forum statistics or this will be a one time help ;)

Regards,

[misamix]

I have same problem with mazda 3, can someone edit dump?

[klukasz2215]

Here

Try this one ;)

Go improving your forum statistics or this will be a one time help ;)

Regards,

Hello boss, can you repair my eeprom ?

[s qubiak]

Hello boss, can you repair my eeprom ?


Your file is good.
Save it on the new ST memory.

[misamix]

Your file is good.
Save it on the new ST memory.


and what about my file?

[s qubiak]

and what about my file?

Save it on the new ST memory.

[klukasz2215]

Your file is good.
Save it on the new ST memory.

Working fine, thanks.

[carbon7319]

Hi friends.
I hawe problem with this Mazda error P0610 and speedo not work.
I try write this file to AT93c56 and ST93c56 and problem present.
Can someone take look to file and what can i do ?
770824

[misamix]

Save it on the new ST memory.


work's perfect, thanks!

[claser]

Hi everyone,

I recently bought a Mazda 3 2005 with the same issues P0610. At first, the odometer was working on and off with the check engine on. Recently, it started getting really cold outside, the engine starts but it just turn itself off after few minutes with the check battery light on. I took the car to a service, the battery and alternator are all ok and they recommended buying a new ECU (which I can not find - Z601 100140-7041. Can my problem be fixed? Thank you

[kiszka]

Hi everyone,

I recently bought a Mazda 3 2005 with the same issues P0610. At first, the odometer was working on and off with the check engine on. Recently, it started getting really cold outside, the engine starts but it just turn itself off after few minutes with the check battery light on. I took the car to a service, the battery and alternator are all ok and they recommended buying a new ECU (which I can not find - Z601 100140-7041. Can my problem be fixed? Thank you

It should be possible to do
needed reading eeprom to say more precisely

[s qubiak]

Hi friends.
I hawe problem with this Mazda error P0610 and speedo not work.
I try write this file to AT93c56 and ST93c56 and problem present.
Can someone take look to file and what can i do ?
770824

Save it on the new ST memory.


Test and raport.

[claser]

Hi,

Thank you for your fast reply. I will post the eeprom reading as soon as I receive it from the service.
I did have the same symptoms as everyone wrote in this post regarding P0610, but then it got worse, the check battery light comes on and the engine stalls.
Now, I also have P0031 and P1260.
Appreciate your effort!

[vampirodauva]

hi
I have same problem with Mazda 3 1.6 benzin, error P0610 and speedo not work.
someone can help me to solve this ?
many thanks
regards

[morgano]

hi
I have same problem with Mazda 3 1.6 benzin, error P0610 and speedo not work.
someone can help me to solve this ?
many thanks
regards




Hello

Your file here. ;)

Regards,

[vampirodauva]

Hello

Your file here. ;)

Regards,

hi morgano
many thanks for help . works fine.
Happy new year for all members D.K.
regards

[claser]

Hey guys,

Please help me fix speedometer issue, P0610.
Kind regards,

[rafal]

Hey guys,

Please help me fix speedometer issue, P0610.
Kind regards,
post dump..........................

[claser]

Apologies, I wasn't aware that bin files aren't accepted when uploading.
I have attached to an archive now.
Hope it's okay.
Thank you

[rafal]

bad readed....................
you have 20 files on this thread - download and compare with your's

[claser]

ok, I haven't done this myself. I have asked someone that has that memory reader. I will ask him tomorrow again.
Unfortunately, I can not view previously posted eeprom readings as their archives are encrypted.
I need to post the reading from memory 93c56 as far as I understood, right?

[morgano]

Apologies, I wasn't aware that bin files aren't accepted when uploading.
I have attached to an archive now.
Hope it's okay.
Thank you

That does not look like a good reading. At least for my eyes. Ask him to read in 16 bit mode

[rafal]

That does not look like a good reading. At least for my eyes. Ask him to read in 16 bit mode

and i think like you............... ;)

[claser]

I can not open the file. I do no have any tools. Tried creating a cue file but I couldn't mount it to iso. I don't know exactly what good reading means. Is it corrupted or? :hmmmm2:
I will ask tomorrow for the 16 bit mode.

Thanks!

[WISETIGER]

Could anyone please repair my file
read 16b 93c56
many thanks

[WISETIGER]

please any help....

[WISETIGER]

PROBLEM solved with as buit configuration with AVDI
ABS was configured as absent>>>

[nemena]

Could someone repair my dump also?
Kind regards:
Peter

[rafal]

Could someone repair my dump also?
Kind regards:
Peter

here.......................

[claser]

Hey guys,

Please help me solve P0610.
I have attached the file. Hope this is the one :tears_of_joy:

Kind regards,

[nemena]

Thanks to Rafal!

[toncsa]

Hey guys,

Please help me solve P0610.
I have attached the file. Hope this is the one :tears_of_joy:

Kind regards, 782715

[nemena]

Thank you, but this solution did not work.

[toncsa]

Thank you, but this solution did not work.


Cannot repair the P0610?

[morgano]

Cannot repair the P0610?

How did you read your file? why does it has all bytes swapped with their nearest? Strange file.

[toncsa]

I read with a GQ4X4. Now with an X-prog

[Lanike71]

I am still looking for a solution for my mazda 3 ad p0610 error.
I think that there should be a sticky subject, showing how to read the eeprom memory, what hard and software is needed.
Thank you.

[thinwire]

Seconding Lanike71's reply - I'd be interested in what kind of hardware you guys are using and how you're modifying the loaded data.
The configuration values look like they'd be alterable even through FORScan - but I'll rip open the ECU if I need to.

[thinwire]

I've now ordered an X-Prog package as well as in-circuit work probes. I'm new to this, so if there's anything else I'll need in order to get to work with the ECU, I'd appreciate any info.

Update: I pulled the vehicle ID info block through FORScan, resulting in a 128 byte dump. There, however, I noticed a discrepancy in byte 36 between the cold and the hot read, suggesting that if I can get the entire ID block rewritten, the problem might resolve itself. I'm still waiting on the X-Prog and relevant probes, as that will allow me to work on the chip directly, but there's still a chance I could get the issue fixed over OBD-II.

[thinwire]

Hopefully my last bump: what fixed the issue for me was to read the as-built configuration data from the PCM while warm through FORScan with a USB connected ELM327 adapter. Then, when the car was cold (i.e. this morning), I loaded up the warm dump and rewrote the PCM configuration data. Speedo/odo worked right away, after clearing DTCs MIL was out. I'll keep an eye on the situation, but at least for me, this seems to have been a fix that did not require disassembly of the PCM.

[zuzulic]

Hi guys, I have the same problem on my 1.6 petrol mazda 3 bk (error p0610 and dead odometer). I have successfully retrieved the dump from my ecu but idk which memory location should I modify.

Could you please help me?
Thank you and cheers ✌

[dawidgta123]

Hello,my problem is mazda 3 error ecu P0610 please help me, eeprom ori, thanks

[kumrulu5353]

The vehicle does not give gas in the first start in the morning, it will recover when the vehicle is warmed up. Writes the p0610 code? What's the reason? Can you help me?

[kumrulu5353]

Sabah ilk çalıştırmada araç gaz vermiyor, araç ısındığında eski haline dönüyor. P0610 kodunu yazıyor mu? Sebebi nedir? Bana yardım eder misiniz?

[kumrulu5353]

Sabah ilk çalıştırmada araç gaz vermiyor, araç ısındığında eski haline dönüyor. P0610 kodunu yazıyor mu? Sebebi nedir? Bana yardım eder misiniz?

[s qubiak]

Hello,my problem is mazda 3 error ecu P0610 please help me, eeprom ori, thanks

change the memory to the new company ST

Get more active, not just take.

[s qubiak]

kumrulu5353


English, please

[s qubiak]

Hi guys, I have the same problem on my 1.6 petrol mazda 3 bk (error p0610 and dead odometer). I have successfully retrieved the dump from my ecu but idk which memory location should I modify.

Could you please help me?
Thank you and cheers ✌

Your file is good.
Change the memory to the new company ST

[s qubiak]

I read with a GQ4X4. Now with an X-prog



Your activity is space you sweep buddy

[dawidgta123]

Dziękuje Ci bardzo za pomoc . Postaram się być bardziej aktywny .

[websergei]

Hi guys.
I'm here because I also have the problem with P0610 in ECU on Mazda 3 1.6i 2003.
I tried to find problem like s qubiak
repaired files. But it seems my dump is different.
Can you please help me?

[websergei]

Hi guys.
I'm here because I also have the problem with P0610 in ECU on Mazda 3 1.6i 2003.
I tried to find problem like s qubiak
repaired files. But it seems my dump is different.
Can you please help me?


P.S. Thanks. I've made it myself.

[idan357]

P.S. Thanks. I've made it myself.

Hello,

I want to do it myself also, can you please elaborate on how you did it ? im using FORscan software.

[adikson]

Can te old EEPROM be swaped for new: M93C56-WMN6P ?

[elemar]

Hello . in my case the speedometer works. the error could not be deleted. I reprogrammed the forscan with the size of the tire and brakes in the engine control unit and it works



https://www.digital-kaos.co.uk/forums/image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAQAAAA ngNWGAAAA/0lEQVR4AYXNMSiEcRyA4cfmGHQbCZIipkuxnJgMStlMNmeyD2d wmc8 sZgxYJd9ErIZFHUyYYD7fkr6l4/rnvmtl7 KitrqV/fq2Y5eLY3Z9S48eRLe7BmVZ9qhTLhQ0algzZWQOVKSsCF8OjAn wbxDTWFDUhPK/jMr1H6HE/IqRky2DyvCefuwItwZzodVoYRiLqMkVCXrwpJ9twZ sgfDYEFYl8wIWxZ9uFf7zkallxlJh4YrLGsKjZRx7VGHhLqwgF UN45DGdb8MeXGpgB4ABZdeDcpZEY51A hyLKz4S1W4MQWm3AibWtgWmk6dyISa1pSdyWTOlLXVp0 eL9D/ZPfBTNanAAAAAElFTkSuQmCC

[naxos]

Hi Guys... I have the same problem. Mazda 3 1.6 '04, speedo not working and DTC 0610 which cannot be removed.Could anyone help me, here is a dump from PCM ... Thanks

EDIT... Problem solved. Thnx s qubiak for no pass file. I compared the files, swapped the configuration blocks in ForScan and everything is ok, no DTC and speedo is OK. In the attachment my file after processing, maybe it will also help someone in the future.

[pramodp1621]

hi guys,

i have same issue P0610 on ecu 279721-2970.

[Antonio266]

hi guys,

i have same issue P0610 on ecu 279721-2970.
Your dump doesn't look good to me..
Try to clean eeprom and read again

[pramodp1621]

Hello,

have upload with flash from ecu as well

[kdika]

Hi. Can AT93c56 be used instead of CT93c56? How critical is the manufacturer? I can't find ST anywhere in my country.

[kiszka]

Hi. Can AT93c56 be used instead of CT93c56? How critical is the manufacturer? I can't find ST anywhere in my country.

it should work

[neoxy]

Hi guys.
Please repair my dump. DTC P0610
thanks in advance

[spider-wifi]

Hello,

I have the same problem DTC P0610

dump in attach

Thanks

[spider-wifi]

nobody to help?

[patr]

I have this same problem with my Mazda3 with (p0610).
Maybe someone can help me ?
Thanks and Regards.

[morgano]

I have this same problem with my Mazda3 with (p0610).
Maybe someone can help me ?
Thanks and Regards.

Put this bin on the ecu eeprom and test ;)

[johnypl]

Hi. I have the same problem on Mazda 3 1.6 2004 error p0610.
I'm throwing my 93c56 (x16) on. Thanks so much.

[johnypl]

I have no chance to help with my problem?

[kiszka]

I have no chance to help with my problem?
test eeprom
https://mega.nz/file/F753BJ7T

[johnypl]

Thanks, everything works.

[kareszka]

Hi !
I have same problem with 2005 mazda3 1.6 gasoline , P0610
Please repair my dump

[kiszka]

Hi !
I have same problem with 2005 mazda3 1.6 gasoline , P0610
Please repair my dump

https://mega.nz/file/ZjIlwSSK

[kareszka]

https://mega.nz/file/ZjIlwSSK
Thanks !! I can download sunday , I hope this link work on this day .

[kareszka]

Dear kiszka !
Thanks again , works perfect !!

[matthew27]

I have same problem with 2005 mazda3 1.6 gasoline automatic , P0610
Please repair my dump. need help thanks.

i uploaded reading 8bit and 16bit.

thank you in advanced

[kiszka]

I have same problem with 2005 mazda3 1.6 gasoline automatic , P0610
Please repair my dump. need help thanks.

i uploaded reading 8bit and 16bit.

thank you in advanced


in my opinion the eeprom are misread

[matthew27]

i read again in st. please check thanks,

[matthew27]

up up need help..

[ricked]

up up need help..

dude. check other files in this thread and see the issue with your files, also 9 posts incl these 3 in this thread for 10 years?

[matthew27]

@ricked

i readed again in ST, its same bad files or corrupted?

[ricked]

eeprom dead or indeed corrupt

[matthew27]

i read the eeprom in dashbord or cluster. because in ecu no eeprom 93c56.

i uploaded the files read by ktag

[matthew27]

HERE IS THE CORRECT FILE NOW.

THANKS

[ricked]

HERE IS THE CORRECT FILE NOW.

THANKS

your file, try it as there are more then 1 error in your file

[matthew27]

what is the password?

[laurenwolf]

Hi i can help P0610 mazda 3 2004 dump 93c56x16

[s qubiak]

Hi i can help P0610 mazda 3 2004 dump 93c56x16

Your file is ok

change eep production ST

[adilson]

me puede ayudar con Mazda
Dash no funciona y dtc P0610 hace mientras se calienta y no se puede eliminar
Aquí archivo eeprom

[morgano]

me puede ayudar con Mazda
Dash no funciona y dtc P0610 hace mientras se calienta y no se puede eliminar
Aquí archivo eeprom

Next time don't play with colours use white over dark. ;)

And think about improoving your statistics on forum.

Regards,

[adilson]

Thank you very much friend, I try to improve, a greeting and sorry, bad English

[painkillergtx]

can everyone Help with Mazda3 1.6Gas trouble P0610 with Mil Lamp and no Speedo..:nonchalance:.

Thanks in Advance....

[rafal]

can everyone Help with Mazda3 1.6Gas trouble P0610 with Mil Lamp and no Speedo..:nonchalance:.

Thanks in Advance....
use brand new ST c56

[painkillergtx]

Hi rafal....sorry dont work, is the same trouble...

[rafal]

Hi rafal....sorry dont work, is the same trouble...

brand new ST 93c56 mounted ?
probably NOT

[painkillergtx]

Yes... new

[rafal]

Yes... new

for everybody work but not for you hmmmmmmmmmmm

[painkillergtx]

Job done….
Rafal my dump works, only new chip !

[kareszka]

Hi !
Someone can repair this dump , DTC P0610 , no speedo
Thanks

[kareszka]

Hello
Someone can help ?

[kiszka]

Hi !
Someone can repair this dump , DTC P0610 , no speedo
Thanks
https://mega.nz/file/UnxGHa4K

[kareszka]

Works perfect ! Thanks again.

[kiszka]

Works perfect ! Thanks again.
pressing the reputation button is a reward for not paying for help

[Sady369]

hello friends I also have a problem Mazda3 (1.6/77kw BK) p0610 does not show speed eeprom loaded,
can you help me?
thank you very much

HOW DO I INSERT A FILE ?????

https://ulozto.sk/file/OZt40QaMrOnj/mazda3-p0610-m93c56-x16-rar#!ZJL3MGR1MQV1LwRmZTEvLJL4AQtlnz5CpaqUDwW3nzqsA Qtk

[gwiazdamb]

hello friends I also have a problem Mazda3 (1.6/77kw BK) p0610 does not show speed eeprom loaded,
can you help me?
thank you very much

HOW DO I INSERT A FILE ?????

https://ulozto.sk/file/OZt40QaMrOnj/mazda3-p0610-m93c56-x16-rar#!ZJL3MGR1MQV1LwRmZTEvLJL4AQtlnz5CpaqUDwW3nzqsA Qtk


Please .................

[gege974]

[QUOTE=Sady369;4506504]bonjour les amis j'ai aussi un problème Mazda3 (1.6/77kw BK) p0610 n'affiche pas la vitesse eeprom chargée,
pouvez vous m'aider ?
merci beaucoup

COMMENT INSERER UN FICHIER ?????

https://ulozto.sk/file/OZt40QaMrOnj/mazda3-p0610-m93c56-x16-rar#!ZJL3MGR1MQV1LwRmZTEvLJL4AQtlnz5CpaqUDwW3nzqsA Qtk _


hi

here is your repair file

[d.zio]

hello to all
mazda rx8 denso ecu p0610 fault
279700-2287 N3H8
ANY HELP APPRECIATED
THANKS!!!!!!

[multi666]

hi can any check this dump?

[morgano]

hello to all
mazda rx8 denso ecu p0610 fault
279700-2287 N3H8
ANY HELP APPRECIATED
THANKS!!!!!!


hi can any check this dump?

Here both files.

Good luck

[multi666]

i see the ori is the same with the mod??

[morgano]

i see the ori is the same with the mod??

True, attached wrong file before, here is good one. Same pass.

[FFCCSa1F]

I don't know if there's any smarter way of doing this, but I took a look at some of the fixed 93C56 files posted here in a hex editor. A lot of the data is identical or empty in all of them, and I could use that insight to fix one myself. I put together this gif to make it easier to see which data is identical in all of the dumps. If your dump has different data in those areas, there's a good chance that you can just change it to be identical with the other dumps and it'll work fine. I don't know what any of the variable data is, but I have a sneaking suspicion that corruption there isn't as critical.

It should also be noted that the two 220 µF/10 V capacitors in this ECU go bad and should be replaced when doing this repair. I suspect that they might be a part of what causes this problem.

I used an 809H universal programmer to read and write the chip, though I had to desolder it for that to work.

I hope this can be of help to someone!

EDIT: The forum engine automatically turns gifs into jpgs (why?!), so I had to put it in a .zip.

967904

[mk5gt]

Mazda 3
P0610 fault with not working cluster
Checked the 93c56 eeprom and according to this thread everything seems to be ok.
Can someone check the file for correctness?
Thanks!

[atom94]

Hello, can somebody help with this file ?
Mazda 3, speedometer not working and dtc p0610.
Can you correct file from 93c56 ?
Many thanks

[mk5gt]

Just an update.
Replaced 93c56 chip.
Wrote the ori file and the p610 fault disappeared.
Tachometer works .

[einet]

Hello

how can also help me to find the solution on this car ?
I have tested many files and not work.

thanks

[gwiazdamb]

Hello

how can also help me to find the solution on this car ?
I have tested many files and not work.

thanks


Replace the memory with a new one

[einet]

Hello

Have chenged with a ST93c56 and error sill there.

[einet]

hello, any can arange me only a Working Dump that not have error ?

thanks

[turboo]

hello pleas help i have p0610 and speedo no work .Thanks

[gwiazdamb]

hello pleas help i have p0610 and speedo no work .Thanks

Please....................

[bladeus86]

Hi, please help i have p0610 and speedo not work, MAzda 3 2004 1.6 petrol
Thanks

[boniing]

Hello everyone, I'm pretty new to this thread and if anyone can give me some advice... On my own car, Mazda 3 BK 2004, 1.6 Tdi, I have a problem and I don't know how to solve it.
When starting the vehicle, the vehicle could not start the electric starter. Ok, I thought the problem was classic. I have checked all the fuses, relays, removed the starter motor and sent it to the shop for repairs etc... And all of that is fixed but the car still won't start the starter motor.
I realized that I have written DTC errors in the car and that's where the problems are.
The errors are:
PATS=B2139 (PATS (Passive Anti Theft System)
data mismatch)
Immobilizer module-PCM=P1260 (Theft Detected, Vehicle Immobilized)
I have saved data from the engine computer because two years ago I did EGR-OFF and I tried to enter that program again in the car, but I didn't succeed.
Does anyone have any advice on how I can solve this?

I have MPPS V18. Is that helpful?

[morgano]

Hi, please help i have p0610 and speedo not work, MAzda 3 2004 1.6 petrol
Thanks

duplicated content, bad read, read it in 16 bit mode.

[sancaman]

Hi.
I also have such a problem. Mazda 1.6 petrol with error code p0610.
Thanks

[gwiazdamb]

Hi.
I also have such a problem. Mazda 1.6 petrol with error code p0610.
Thanks

Please...................


The following errors occurred with your submission

sancaman has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

[sancaman]

Hi!
Please send the code again because there was no room in my folder. I deleted the old messages, so I can now receive them.
thanks