Golf 5 Visteon 95160 Error

[SKODANIKOV]

Hello. I have dashboard Visteon 1K0920861B, the car come to me with message Error!
Please help me with dump and correct checksum.
Here is dump 95160. Thanks in advance.:victorious:

[lashkov]

for you cs oksy, good luck

[lashkov]

read error memory in instrument cluster and write here

[dashtec]

sometime error message if led broken on dash

[SKODANIKOV]

No error fault codes in dash, before me anybody tryed to change km in dash, and after that Error message appeared.

[SKODANIKOV]

lashkov
I'll try your dump in monday, and report

[steveleo]

Is it possible that dash was changed from 225k to 145k ?

[Matttes]

I have few times ERROR in this dashes after broken driver on the PCB.

[SKODANIKOV]

Yes someone tryed to change odometer with china's carprog and after that had Error message.

[SKODANIKOV]

may be from 195k to 145k ,in engine ecu 194042km

[steveleo]

Try this. Maybe works.

[SKODANIKOV]

today i try and report

[SKODANIKOV]

The dump don't worked. I bought secondhand dashboard, added new key, fixed the mileage and now everything is OK. Tnank you very much to all for your help.

P.С
Only the radio needs to be encoded, i don't know why....
Tomorrow i'll decode it :)

[kukukatsu]

The dump don't worked. I bought secondhand dashboard, added new key, fixed the mileage and now everything is OK. Tnank you very much to all for your help.

P.С
Only the radio needs to be encoded, i don't know why....
Tomorrow i'll decode it :)

this is normal :)

[JFR-Tuning]

Tip.

You can repair this fault simple
Program again the Odo with China digiprog or Diagprog DP4. tool have repairfunction

for all

Change Dash -Used- without a Key from Golf V Immo IV carprog offer a solution

Or
Use old eeprom from org Dash
You get Error
Prog Odo new with digiprog or elprosys
Make Immo Off in ECU

FINAL
NO TEXT IMMO IN DASH, NO SIGNAL NOTHING

DTC IN DASH EEPROM ERROR BUT NO SIGNAL LAMP ON