View Full Version : 2016 ford torneo dash nec+ 95320WT
rtbdiagnostic
7th January, 2019, 08:53 AM
good day need advice can this dash with NEC D70F3425GJ - correction only be done via obd or can it also be done by changing data on the 95320WT chip or will the data in the bcm revert old mileage back again - any advice be appreciated on correct procedure :excitement:
drpeter
7th January, 2019, 09:12 AM
good day need advice can this dash with NEC D70F3425GJ - correction only be done via obd or can it also be done by changing data on the 95320WT chip or will the data in the bcm revert old mileage back again - any advice be appreciated on correct procedure :excitement: can be done by 95320.
rtbdiagnostic
7th January, 2019, 09:50 AM
the 95320wt (k430e) chip is it not write protected and can this chip be replaced by a normal 95320wp (k132p) chip if needed would this SPI 32kbit high clock speed chip have the same specs as the ori 95320wt chip ....:biggrin:
drpeter
7th January, 2019, 09:59 AM
the 95320wt (k430e) chip is it not write protected and can this chip be replaced by a normal 95320wp (k132p) chip if needed would this SPI 32kbit high clock speed chip have the same specs as the ori 95320wt chip ....:biggrin:the 95320wt doesn't have a ''incremental area'' so read write is no problem.
brend
7th January, 2019, 12:26 PM
Read/write without problem!
I think problem in yours programmer which not work this type eeprom like 95320wt. no more.......
the 95320wt (k430e) chip is it not write protected and can this chip be replaced by a normal 95320wp (k132p) chip if needed would this SPI 32kbit high clock speed chip have the same specs as the ori 95320wt chip ....:biggrin:
rtbdiagnostic
7th January, 2019, 12:32 PM
one more question I know there is no immo data in cluster dump as car starts without dash installed - will dump from another ford torneo/transit work when used or must use ori dump to modify :questionmark:
Dr. Zoidberg
7th January, 2019, 12:42 PM
one more question I know there is no immo data in cluster dump as car starts without dash installed - will dump from another ford torneo/transit work when used or must use ori dump to modify :questionmark:Dashboard 95320 has info VIN.
rtbdiagnostic
7th January, 2019, 01:30 PM
can change this dump for me from 200xxxkm to as near as possible to 201200km :wavey:
clusters
7th January, 2019, 01:38 PM
How about exactly 201200
rtbdiagnostic
7th January, 2019, 01:51 PM
cool on the dot ...:ciao:
juri huhu
7th August, 2019, 05:43 PM
How about exactly 201200
Hi, i also dumped the 95320.. I See my VIN, but not the mileage..
Ok, maybe its encoded or hex!?
When i erase the 95320 will that work? (to Set it to Zero)
Thx - Greetings from Germany
jomberykaso
7th August, 2019, 06:20 PM
Hi, i also dumped the 95320.. I See my VIN, but not the mileage..
Ok, maybe its encoded or hex!?
When i erase the 95320 will that work? (to Set it to Zero)
Thx - Greetings from Germany
If you erase the 95320 you are going to screw it up...you only have to read data from eeprom, then you have to ulpoad your file here in bin format, then somebody will put mileage you want
juri huhu
9th August, 2019, 04:40 PM
Ok, here is my dump. It maybe stays at 1050430 or 999999 km.. 50430 km would be fine ;-)
thanks a lot!
juri huhu
27th August, 2019, 06:03 PM
Hallo again.
Let me tell you my Problem..
I bougth one New/used speedometer. it is with Color Display. The mileage was higher then the orignal. I tried the Ford IDS to Change the mileage. But you only can increase..
So I Set it to 1.050.430 km... It Shows now 999.999 km :-(
Now i Flash the "201200.bin" and it Shows 201.200km.
I would use the New/used Color Display with the right mileage.
Could somebody Change it to 53.105km?
Please?
Tank you and greetings
Dr. Zoidberg
27th August, 2019, 06:18 PM
Hallo again.
Let me tell you my Problem..
I bougth one New/used speedometer. it is with Color Display. The mileage was higher then the orignal. I tried the Ford IDS to Change the mileage. But you only can increase..
So I Set it to 1.050.430 km... It Shows now 999.999 km :-(
Now i Flash the "201200.bin" and it Shows 201.200km.
I would use the New/used Color Display with the right mileage.
Could somebody Change it to 53.105km?
Please?
Tank you and greetings
upload your file
juri huhu
28th August, 2019, 07:49 AM
Here it is. Its the same from User clusters.
Thanks
brend
28th August, 2019, 09:11 AM
2016.......
Only original dump.
With another dump you risk get in dash error and that's it.
Here it is. Its the same from User clusters.
Thanks
juri huhu
28th August, 2019, 06:47 PM
I only Changed the partnumber, upload and it Works! The mileage is 201200km and all is looking fine! After Test in the Dump has now my VIN..!
Now i only Need my original mileage of 53105km , Please ;-)
Here my actual dump:
Thank you Guys !
ohkarol
5th November, 2019, 02:46 PM
Hi all
Need help with fixing mileage
need 285200
999999 on dash
thanks
jomberykaso
5th November, 2019, 02:58 PM
Hi all
Need help with fixing mileage
need 285200
999999 on dash
thanks
report.........................
ohkarol
5th November, 2019, 03:12 PM
542113 now :(
jomberykaso
5th November, 2019, 03:30 PM
542113 now :(
:flybye:...............................
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.