Sync block problem not correct on EDC15C2

[nono03150]

Hello,
I have a problem on my project mapping edc15c2.
I am a novice and I wanted to know if my cheksum is good.
it tells me that I have 2 sync block no correct.
I attach you my project.

[gaiojulioR]

what is your car?and what do you need for your project?
Your checksum is OK

[nono03150]

I have a Peugeot 806.
I made my map, but at the bottom of the WinOls screen it makes Sync block problem not correct with the two red arrows.

[gaiojulioR]

don't wory,all is ok, try with ecm too to make sure

[nono03150]

ECM does not find me any drivers on my mod file, whereas on the ori it finds it normal?

[gaiojulioR]

it is normal if ecm doesn't find driver in your mod file but find driver manualy, use the three last number on the hardware version and software version ef your ecu.
find this driver in ecm with mod file for your car :135_496
Then, to verify the checsum,go to instrulent>verify checksum>and select the 5-citroen/peugeot bocsh HDI,>compute
if all green,you are OK

[nono03150]

I tried several things, I do not know if I'm good.
I hesitate to inject it into my EDC15 despite being one in advance.585123



585124

[gaiojulioR]

If you are newbie, train only with first :
-injection at part throttle(2),
-fuel during acceleration,
-turbo preasure
-torque limiter
do not modify the rest,you will understand later after more training.


even if you have modified anything with these maps, you will have no major problem, on the other hand on the rest, we must think about the safety of the engine.
Even so, it is necessary to modify in the reasonable limit.


on those, I invite you to reverify your project
even if you have modified anything with these maps, you will have no major problem, on the other hand on the rest, we must think about the safety of the engine.Even so, it is necessary to modify in the reasonable limit.on those, I invite you to reverify your project

[nono03150]

Thank you so much
I will do that

[gaiojulioR]

if you are lost, let me know and do not forget to tell the result.