View Full Version : 2018 honda accord jtag pinout with etl programmer
ReverseFlash
8th January, 2019, 06:07 AM
Does anyone have the pinout for this module? Its the 2018 honda accord
SOLOS
8th January, 2019, 07:53 AM
I ONLY HAVE WITH CPT FRIEND
Brayn
8th January, 2019, 08:07 AM
Does anyone have the pinout for this module? Its the 2018 honda accord
please post some pictures of SRS unit and Part number
ReverseFlash
8th January, 2019, 06:57 PM
77960-TVA-A460-M4
https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=510655&d=1519917839
https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=510657&d=1519917839
urametz
8th January, 2019, 07:35 PM
I do not remember where I downloaded, use.
ReverseFlash
8th January, 2019, 07:41 PM
This one is for CPT programmer. I'm not sure if it's possible to connect using ETL programmer. I could try, but don't wanna risk the board.
urametz
8th January, 2019, 07:53 PM
For reading, I think there is no risk, J-TAG is a standard for all programmers along the lines of tdo, tms, reset, etc. everyone has it. The only thing is not to confuse power 3.3V or 5V. Good luck
ahsanali
10th January, 2019, 03:18 AM
use etl programmer and 3.3v
ahsanali
10th January, 2019, 03:19 AM
if you need pic connection let me know or email me
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.