PDA

View Full Version : DSG CHECKSUM: Kess V2 2.47



nps1994
8th January, 2019, 04:43 PM
Happy new year guys!

i am about to read the dump of my DSG (DQ250) using my Kess 5.017 with Ksuite 2.47. Then remap it (change Torque Limiter for now) and flash it back. Since my winOLS doesn't support checksums for these transmissions I'm hoping that KSuite 2.47 will do the trick.

Has anybody tested the checksum function of Kess on the DSG transmisisons?

Best regards.

daynight
8th January, 2019, 05:02 PM
It works :)

nps1994
8th January, 2019, 05:09 PM
Thanks for your swift reply :) . Have you tested with clone Kess or original?

robinbga
9th January, 2019, 09:47 AM
Happy new year guys!

i am about to read the dump of my DSG (DQ250) using my Kess 5.017 with Ksuite 2.47. Then remap it (change Torque Limiter for now) and flash it back. Since my winOLS doesn't support checksums for these transmissions I'm hoping that KSuite 2.47 will do the trick.

Has anybody tested the checksum function of Kess on the DSG transmisisons?

Best regards.I need to do the same, what cable are u using to read the TCM.
If u don't mind taking pictures, I could make it myself.
Thank u

Kess V2 . K-Tag
MiniPro . UPA . VVDI2

nps1994
9th January, 2019, 02:53 PM
Will upload pictures later mate. But i used this guide, and then connected the TCU plug to a female OBD socket instead.

http://blog.eobdtool.co.uk/kess-ktag-adapters-pinouts-dsg-dq200-dq250-14p600kt06/